Core materials (show all)

epoxy foaming system sicomin pb170 dm03, epoxy foam system (Set of 2 components resin + hardener)   1.00 kg set (0.76 kg resin + 0.24 kg hardener) A system of 2 liquid components that when mixed, expands into cellular foam. After cure, it becomes very tough, and exhibits high performance, unique characteristics not possible to obtain by other expanding or liquid foams like polyurethane, polystyrene etc. The PB170 / DM03 cellular foam production system expands and hardens to a final density of 170 kg / m3. The DM03 is the faster hardener. Product description The foaming products are 2 component systems (resin + hardener) developed for "in situ" low density foam production. They can be used to fill mold cavities, and avoid the use of low density fillers and/or the cost of machining of other readily expanded foams like PVC. They come white, but can be colored by adding any epoxy compatible pigment. The final density of the foam is a result of the choice of the resin. The PB170 resin provides approximately 170 kg / m3 foam. The hardener (in this case the DM03) influences only the curing time and not the potential thickness or final density of each shot (or layer) in the cast part.   The process can be separated in 2 steps: step 1: The mixed resin+hardener expand rapidly into foam step 2: The foam hardens slowly Key features: "In situ" and "in mold" manufacturing of low density foam core helps to avoid the use of low density fillers or CNC machining of expanded foams. Good adhesion onto all type of materials like prepregs and wet/dry epoxy, polyester and vinylester systems. Homogeneous density, floating volume, and very low water absorption. Can be used to increase the density of other cores and honeycomb. Foam blocks can be machined to produce models and prototypes. Physical properties of resin PB170: Color: White Viscosity at 25 oC / 77 oF: 8000 (+-1500) Density: 1.12 (+-0.01) Physical properties of hardener DM03: Color: Light yellow Viscosity at 20 oC / 68 oF: 210 (+-40) Density at 20 oC / 68 oF: 1.00 (+-0.01) Mixing ratio: 31 hardener to 100 p.b.w. resin Properties of cured system: Final density after free expansion at 20 oC / 68 oF: 170 (+-20) kg / m3 Expansion ratio at 20 oC / 68 oF: X 6.2 Thermal stability after 24 hrs at room temperature + 6 hrs at 40 oC / 104 oF: Tg1 above 50 oC / 122 oF Thermal stability after 24 hrs at room temperature + 12 hrs at 60 oC / 140 oF: Tg1 above 70 oC / 158 oF Exothermic parameters: Are the thermal conductivity of substrate, open or closed mold, geometry and thickness, temperature of materials and mold, ambient temperature, volume and mass of the casting. When casting onto a thick laminate that is curing, the heat produced by the resin system can increase the reactivity of the foaming system.   Intrastat Number for this product: Epoxy: 39073000, Hardener: 38249098..

epoxy foaming system sicomin pb170 dm02, epoxy foam system (Set of 2 components resin + hardener)   1.00 kg set (0.74 kg resin + 0.26 kg hardener) A system of 2 liquid components that when mixed, expands into cellular foam. After cure, it becomes very tough, and exhibits high performance, unique characteristics not possible to obtain by other expanding or liquid foams like polyurethane, polystyrene etc. The PB170 / DM02 cellular foam production system expands and hardens to a final density of 170 kg / m3. The DM02 is the slower hardener. Product description The foaming products are 2 component systems (resin + hardener) developed for "in situ" low density foam production. They can be used to fill mold cavities, and avoid the use of low density fillers and/or the cost of machining of other readily expanded foams like PVC. They come white, but can be colored by adding any epoxy compatible pigment. The final density of the foam is a result of the choice of the resin. The PB170 resin provides approximately 170 kg / m3 foam. The hardener (in this case the DM02) influences only the curing time and not the potential thickness or final density of each shot (or layer) in the cast part.   The process can be separated in 2 steps: step 1: The mixed resin+hardener expand rapidly into foam step 2: The foam hardens slowly Key features: "In situ" and "in mold" manufacturing of low density foam core helps to avoid the use of low density fillers or CNC machining of expanded foams. Good adhesion onto all type of materials like prepregs and wet/dry epoxy, polyester and vinylester systems. Homogeneous density, floating volume, and very low water absorption. Can be used to increase the density of other cores and honeycomb. Foam blocks can be machined to produce models and prototypes. Physical properties of resin PB170: Color: White Viscosity at 25 oC / 77 oF: 8000 (+-1500) Density: 1.12 (+-0.01) Physical properties of hardener DM02: Color: Clear to light yellow Viscosity at 20 oC / 68 oF: 130 (+-25) Density at 20 oC / 68 oF: 0.98 (+-0.01) Mixing ratio: 36 hardener to 100 p.b.w. resin Properties of cured system: Final density after free expansion at 20 oC / 68 oF: 170 (+-20) kg / m3 Expansion ratio at 20 oC / 68 oF: X 6.2 Thermal stability after 24 hrs at room temperature + 6 hrs at 40 oC / 104 oF: Tg1 above 50 oC / 122 oF Thermal stability after 24 hrs at room temperature + 12 hrs at 60 oC / 140 oF: Tg1 above 70 oC / 158 oF Exothermic parameters: Are the thermal conductivity of substrate, open or closed mold, geometry and thickness, temperature of materials and mold, ambient temperature, volume and mass of the casting. When casting onto a thick laminate that is curing, the heat produced by the resin system can increase the reactivity of the foaming system.   Intrastat Number for this product: Epoxy: 39073000, Hardener: 38249098..

epoxy foaming system sicomin pb250 dm03, epoxy foam system (Set of 2 components resin + hardener)   1.00 kg set (0.76 kg resin + 0.24 kg hardener) A system of 2 liquid components that when mixed, expands into cellular foam. After cure, it becomes very tough, and exhibits high performance, unique characteristics not possible to obtain by other expanding or liquid foams like polyurethane, polystyrene etc. The PB250 / DM03 cellular foam production system expands and hardens to a final density of 250 kg / m3. The DM03 is the faster hardener. Product description The foaming products are 2 component systems (resin + hardener) developed for "in situ" low density foam production. They can be used to fill mold cavities, and avoid the use of low density fillers and/or the cost of machining of other readily expanded foams like PVC. They come white, but can be colored by adding any epoxy compatible pigment. The final density of the foam is a result of the choice of the resin. The PB250 resin provides approximately 250 kg / m3 foam. The hardener (in this case the DM03) influences only the curing time and not the potential thickness or final density of each shot (or layer) in the cast part.   The process can be separated in 2 steps: step 1: The mixed resin+hardener expand rapidly into foam step 2: The foam hardens slowly Key features: "In situ" and "in mold" manufacturing of low density foam core helps to avoid the use of low density fillers or CNC machining of expanded foams. Good adhesion onto all type of materials like prepregs and wet / dry epoxy, polyester and vinylester systems. Homogeneous density, floating volume, and very low water absorption. Can be used to increase the density of other cores and honeycomb. Foam blocks can be machined to produce models and prototypes. Physical properties of resin PB250: Color: White Viscosity at 25 oC / 77 oF: 12000 (+-2000) Density: 1.10 (+-0.01) Physical properties of hardener DM03: Color: Light yellow Viscosity at 20 oC / 68 oF: 210 (+-40) Density at 20 oC / 68 oF: 1.00 (+-0.01) Mixing ratio: 31 hardener to 100 p.b.w. resin Properties of cured system: Final density after free expansion at 20 oC / 68 oF: 250 (+-25) kg / m3 Expansion ratio at 20 oC / 68 oF: X 4 Thermal stability after 24 hrs at room temperature + 6 hrs at 40 oC / 104 oF: Tg1 above 50 oC / 122 oF Thermal stability after 24 hrs at room temperature + 12 hrs at 60 oC / 140 oF: Tg1 above 70 oC / 158 oF Exothermic parameters: Are the thermal conductivity of substrate, open or closed mold, geometry and thickness, temperature of materials and mold, ambient temperature, volume and mass of the casting. When casting onto a thick laminate that is curing, the heat produced by the resin system can increase the reactivity of the foaming system.   Intrastat Number for this product: Epoxy: 39073000, Hardener: 38249098..

  Density: 60 kg / m3 Thickness: 1.5 mm (variation in thickness may occur due to a very thin cutting) Panel size: 1150 X 2350 mm Total surface of 1 panel: 2.70 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 100 kg / m3 Thickness: 1.5 mm (variation in thickness may occur due to a very thin cutting) Panel size: 1050 X 2050 mm Total surface of 1 panel: 2.15 m2 CELLFOAM PVC Is a lightweight, closed cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength to weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption   Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 2 mm Panel size: 1020 X 2180 mm Total surface of 1 panel: 2.22 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption   Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 60 kg / m3 Thickness: 3 mm Panel size: 1150 X 2450 mm Total surface of 1 panel: 2.82 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption   Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 3 mm Panel size: 1035 X 1435 mm Total surface of 1 panel: 1.49 m2   Mechanical properties Compressive strength (MPa): 1.7 Compressive modulus (MPa): 103 Shear strength (MPa): 1.4 Shear modulus (MPa): 31 Shear elongation at break (%): 55 Tensile strength (MPa): 2.0 Tensile modulus (MPa): 87 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption   Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 3 mm Panel size: 1000 X 2150 mm Total surface of 1 panel: 2.15 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption   Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 5 mm Panel size: 1000 X 2150 mm Total surface of 1 panel: 2.15 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption   Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 7 mm Panel size: 1100 X 2200 mm Total surface of 1 panel: 2.42 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 8 mm Panel size: 1000 X 2150 mm Total surface of 1 panel: 2.15 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 60 kg / m3 Thickness: 10 mm Panel size: 1150 X 2450 mm Total surface of 1 panel: 2.82 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 10 mm Panel size: 1000 X 2150 mm Total surface of 1 panel: 2.15 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 10 mm Panel size: 1090 X 1020 mm Total surface of 1 panel: 1.11 m2 Grooves: 20 mm X 20 mm, on one size, both directions ("one side") Grooves width: 2 mm Holes diameter: 2 mm CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. This version is perforated (with holes) and grooved (with carved channels). The perforation and grooves are specifically designed and optimized to facilitate fast resin flow in the infusion/injection process. The perforation allows the resin to pass easily through the foam to the underside, while the grooves distribute the resin flow effectively.   Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 130 kg / m3 Thickness: 10 mm Panel size: 850 X 1900 mm Total surface of 1 panel: 1.62 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 200 kg / m3 Thickness: 10 mm Panel size: 750 X 1600 mm Total surface of 1 panel: 1.20 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 300 kg / m3 Thickness: 10 mm Panel size: 780 X 1480 mm Total surface of 1 panel: 1.15 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 12 mm Panel size: 1100 X 2200 mm Total surface of 1 panel: 2.42 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 100 kg / m3 Thickness: 12 mm Panel size: 950 X 2050 mm Total surface of 1 panel: 1.95 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 13 mm Panel size: 1000 X 2150 mm Total surface of 1 panel: 2.15 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 15 mm Panel size: 1310 X 950 mm Total surface of 1 panel: 1.24 m2 CELLFOAM PVC Is a lightweight, closed cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength to weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 15 mm Panel size: 1000 X 2150 mm Total surface of 1 panel: 2.15 m2 CELLFOAM PVC Is a lightweight, closed cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength to weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 15 mm Panel size: 1090 X 1020 mm Total surface of 1 panel: 1.11 m2 Grooves: 20 mm X 20 mm, on one size, both directions ("one side") Grooves width: 2 mm Holes diameter: 2 mm CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. This version is perforated (with holes) and grooved (with carved channels). The perforation and grooves are specifically designed and optimized to facilitate fast resin flow in the infusion/injection process. The perforation allows the resin to pass easily through the foam to the underside, while the grooves distribute the resin flow effectively.   Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves.   MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify..   Intrastat Number for this product: 39211200..

  Density: 130 kg / m3 Thickness: 15 mm Panel size: 850 X 1900 mm Total surface of 1 panel: 1.62 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 200 kg / m3 Thickness: 15 mm Panel size: 750 X 1600 mm Total surface of 1 panel: 1.20 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 300 kg / m3 Thickness: 15 mm Panel size: 780 X 1480 mm Total surface of 1 panel: 1.15 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 20 mm Panel size: 1100 X 2200 mm Total surface of 1 panel: 2.42 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 20 mm Panel size: 1090 X 1020 mm Total surface of 1 panel: 1.11 m2 Grooves: 20 mm X 20 mm, on one size, both directions ("one side") Grooves width: 2 mm Holes diameter: 2 mm CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. This version is perforated (with holes) and grooved (with carved channels). The perforation and grooves are specifically designed and optimized to facilitate fast resin flow in the infusion/injection process. The perforation allows the resin to pass easily through the foam to the underside, while the grooves distribute the resin flow effectively.   Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 20 mm Panel size: 1000 X 1070 mm Total surface of 1 panel: 1.07 m2 Grooves: 20 mm X 20 mm, on one size, both directions ("one side") Grooves width: 2 mm Holes diameter: 2 mm CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. This version is perforated (with holes) and grooved (with carved channels). The perforation and grooves are specifically designed and optimized to facilitate fast resin flow in the infusion/injection process. The perforation allows the resin to pass easily through the foam to the underside, while the grooves distribute the resin flow effectively.   Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves.   The HT type is suitable for high temperature applications. For example, it can be used for autoclave prepreg sandwich curing at 120°C and 3 bar pressure. Higher temperature and pressure applications are possible, depending on the tolerance for potential partial collapse (collapse refers to a reduction in thickness without implying a loss of mechanical properties). MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 130 kg / m3 Thickness: 20 mm Panel size: 850 X 1900 mm Total surface of 1 panel: 1.62 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 200 kg / m3 Thickness: 20 mm Panel size: 750 X 1600 mm Total surface of 1 panel: 1.20 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 300 kg / m3 Thickness: 20 mm Panel size: 780 X 1480 mm Total surface of 1 panel: 1.15 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 25 mm Panel size: 1090 X 1020 mm Total surface of 1 panel: 1.11 m2 Grooves: 20 mm X 20 mm, on one size, both directions ("one side") Grooves width: 2 mm Holes diameter: 2 mm CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. This version is perforated (with holes) and grooved (with carved channels). The perforation and grooves are specifically designed and optimized to facilitate fast resin flow in the infusion/injection process. The perforation allows the resin to pass easily through the foam to the underside, while the grooves distribute the resin flow effectively.   Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 25 mm Panel size: 1000 X 1070 mm Total surface of 1 panel: 1.07 m2 Grooves: 20 mm X 20 mm, on one size, both directions ("one side") Grooves width: 2 mm Holes diameter: 2 mm CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. This version is perforated (with holes) and grooved (with carved channels). The perforation and grooves are specifically designed and optimized to facilitate fast resin flow in the infusion/injection process. The perforation allows the resin to pass easily through the foam to the underside, while the grooves distribute the resin flow effectively.   Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves.   The HT type is suitable for high temperature applications. For example, it can be used for autoclave prepreg sandwich curing at 120°C and 3 bar pressure. Higher temperature and pressure applications are possible, depending on the tolerance for potential partial collapse (collapse refers to a reduction in thickness without implying a loss of mechanical properties). MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 100 kg / m3 Thickness: 25 mm Panel size: 950 X 2050 mm Total surface of 1 panel: 1.95 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 200 kg / m3 Thickness: 25 mm Panel size: 750 X 1600 mm Total surface of 1 panel: 1.20 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 300 kg / m3 Thickness: 25 mm Panel size: 780 X 1480 mm Total surface of 1 panel: 1.15 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 60 kg / m3 Thickness: 30 mm Panel size: 1150 X 2450 mm Total surface of 1 panel: 2.82 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 30 mm Panel size: 1090 X 1020 mm Total surface of 1 panel: 1.11 m2 Grooves: 20 mm X 20 mm, on one size, both directions ("one side") Grooves width: 2 mm Holes diameter: 2 mm CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. This version is perforated (with holes) and grooved (with carved channels). The perforation and grooves are specifically designed and optimized to facilitate fast resin flow in the infusion/injection process. The perforation allows the resin to pass easily through the foam to the underside, while the grooves distribute the resin flow effectively.   Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 30 mm Panel size: 1000 X 1070 mm Total surface of 1 panel: 1.07 m2 Grooves: 20 mm X 20 mm, on one size, both directions ("one side") Grooves width: 2 mm Holes diameter: 2 mm   CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. This version is perforated (with holes) and grooved (with carved channels). The perforation and grooves are specifically designed and optimized to facilitate fast resin flow in the infusion/injection process. The perforation allows the resin to pass easily through the foam to the underside, while the grooves distribute the resin flow effectively.   Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves.   The HT type is suitable for high temperature applications. For example, it can be used for autoclave prepreg sandwich curing at 120°C and 3 bar pressure. Higher temperature and pressure applications are possible, depending on the tolerance for potential partial collapse (collapse refers to a reduction in thickness without implying a loss of mechanical properties). MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 60 kg / m3 Thickness: 40 mm Panel size: 1150 X 2450 mm Total surface of 1 panel: 2.82 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 40 mm Panel size: 1000 X 1070 mm Total surface of 1 panel: 1.07 m2 Grooves: 20 mm X 20 mm, on one size, both directions ("one side") Grooves width: 2 mm Holes diameter: 2 mm   CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. This version is perforated (with holes) and grooved (with carved channels). The perforation and grooves are specifically designed and optimized to facilitate fast resin flow in the infusion/injection process. The perforation allows the resin to pass easily through the foam to the underside, while the grooves distribute the resin flow effectively.   Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves.   The HT type is suitable for high temperature applications. For example, it can be used for autoclave prepreg sandwich curing at 120°C and 3 bar pressure. Higher temperature and pressure applications are possible, depending on the tolerance for potential partial collapse (collapse refers to a reduction in thickness without implying a loss of mechanical properties). MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 60 kg / m3 Thickness: 50 mm Panel size: 1150 X 2450 mm Total surface of 1 panel: 2.82 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 80 kg / m3 Thickness: 50 mm Panel size: 1000 X 2150 mm Total surface of 1 panel: 2.15 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 100 kg / m3 Thickness: 50 mm Panel size: 950 X 1025 mm Total surface of 1 panel: 0.97 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 100 kg / m3 Thickness: 50 mm Panel size: 1050 X 2050 mm Total surface of 1 panel: 2.15 m2 CELLFOAM PVC Is a lightweight, closed-cell, cross-linked PVC foam designed for universal use in sandwich structures. Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily by CNC machine and by hand, for example with wood shaping tools, smoothed with sandpaper and can be thermoformed into curves. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Ease of adhesion Compatible with most types of resin systems Rot resistant Good thermal insulation Self extinguishing, good fire behaviour Very low water absorption Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 32 kg / m3 Thickness: 2 mm Panel size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2 CELLFOAM PMI Is a very lightweight, closed cell, cross linked rigid PMI (polymethacrylimide) foam designed for high performance sandwich structures. It offers excellent strength to weight and stiffness to weight ratios, outstanding dimensional stability, and a heat deflection temperature of up to 190°C, making it suitable for more demanding medium  and high temperature processing. Compatible with all thermosetting resin systems, it is better suited for prepreg and pressure autoclave curing but also vacuum infusion, compression molding, and other composite manufacturing processes. MAIN CHARACTERISTICS High strength and stiffness to weight ratio Excellent dimensional stability High temperature resistance (HDT up to 190°C) Excellent creep and fatigue resistance Compatible with all thermosetting resin systems Very low water absorption Excellent machinability (cutting, milling, CNC machining) Low dielectric loss and excellent electrical insulation Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 52 kg / m3 Thickness: 3 mm Panel size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2   CELLFOAM PMI Is a very lightweight, closed cell, cross linked rigid PMI (polymethacrylimide) foam designed for high performance sandwich structures. It offers excellent strength to weight and stiffness to weight ratios, outstanding dimensional stability, and a heat deflection temperature of up to 190°C, making it suitable for more demanding medium  and high temperature processing. Compatible with all thermosetting resin systems, it is better suited for prepreg and pressure autoclave curing but also vacuum infusion, compression molding, and other composite manufacturing processes.   MAIN CHARACTERISTICS High strength and stiffness to weight ratio Excellent dimensional stability High temperature resistance (HDT up to 190°C) Excellent creep and fatigue resistance Compatible with all thermosetting resin systems Very low water absorption Excellent machinability (cutting, milling, CNC machining) Low dielectric loss and excellent electrical insulation Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 52 kg / m3 Thickness: 5 mm Panel size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2   CELLFOAM PMI Is a very lightweight, closed cell, cross linked rigid PMI (polymethacrylimide) foam designed for high performance sandwich structures. It offers excellent strength to weight and stiffness to weight ratios, outstanding dimensional stability, and a heat deflection temperature of up to 190°C, making it suitable for more demanding medium  and high temperature processing. Compatible with all thermosetting resin systems, it is better suited for prepreg and pressure autoclave curing but also vacuum infusion, compression molding, and other composite manufacturing processes.   MAIN CHARACTERISTICS High strength and stiffness to weight ratio Excellent dimensional stability High temperature resistance (HDT up to 190°C) Excellent creep and fatigue resistance Compatible with all thermosetting resin systems Very low water absorption Excellent machinability (cutting, milling, CNC machining) Low dielectric loss and excellent electrical insulation Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 52 kg / m3 Thickness: 7 mm Panel size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2   CELLFOAM PMI Is a very lightweight, closed cell, cross linked rigid PMI (polymethacrylimide) foam designed for high performance sandwich structures. It offers excellent strength to weight and stiffness to weight ratios, outstanding dimensional stability, and a heat deflection temperature of up to 190°C, making it suitable for more demanding medium  and high temperature processing. Compatible with all thermosetting resin systems, it is better suited for prepreg and pressure autoclave curing but also vacuum infusion, compression molding, and other composite manufacturing processes.   MAIN CHARACTERISTICS High strength and stiffness to weight ratio Excellent dimensional stability High temperature resistance (HDT up to 190°C) Excellent creep and fatigue resistance Compatible with all thermosetting resin systems Very low water absorption Excellent machinability (cutting, milling, CNC machining) Low dielectric loss and excellent electrical insulation Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 52 kg / m3 Thickness: 20 mm Panel size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2   CELLFOAM PMI Is a very lightweight, closed cell, cross linked rigid PMI (polymethacrylimide) foam designed for high performance sandwich structures. It offers excellent strength to weight and stiffness to weight ratios, outstanding dimensional stability, and a heat deflection temperature of up to 190°C, making it suitable for more demanding medium  and high temperature processing. Compatible with all thermosetting resin systems, it is better suited for prepreg and pressure autoclave curing but also vacuum infusion, compression molding, and other composite manufacturing processes.   MAIN CHARACTERISTICS High strength and stiffness to weight ratio Excellent dimensional stability High temperature resistance (HDT up to 190°C) Excellent creep and fatigue resistance Compatible with all thermosetting resin systems Very low water absorption Excellent machinability (cutting, milling, CNC machining) Low dielectric loss and excellent electrical insulation Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

  Density: 52 kg / m3 Thickness: 30 mm Panel size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2   CELLFOAM PMI Is a very lightweight, closed cell, cross linked rigid PMI (polymethacrylimide) foam designed for high performance sandwich structures. It offers excellent strength to weight and stiffness to weight ratios, outstanding dimensional stability, and a heat deflection temperature of up to 190°C, making it suitable for more demanding medium  and high temperature processing. Compatible with all thermosetting resin systems, it is better suited for prepreg and pressure autoclave curing but also vacuum infusion, compression molding, and other composite manufacturing processes.   MAIN CHARACTERISTICS High strength and stiffness to weight ratio Excellent dimensional stability High temperature resistance (HDT up to 190°C) Excellent creep and fatigue resistance Compatible with all thermosetting resin systems Very low water absorption Excellent machinability (cutting, milling, CNC machining) Low dielectric loss and excellent electrical insulation Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify.   Intrastat Number for this product: 39211200..

nomex aramid honeycomb 48 kg 1.5 mm, nomex honeycomb panel Aramid honeycomb, Nomex or equivalent   Panel minimum size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2 Thickness: 1.5 mm Density: 48 kg / m3 Cell size: 3.2 mm (hexagonal)   Ultra lightweight, aramid honeycomb used in sandwich constructions. Unlike metals, Nomex provides galvanic corrosion resistance (also against corrosion of metal inserts) and allows the use of carbon skins. Other definite advantages are low thermal expansion and conductivity and high heat and fire resistance. Its superior mechanical properties and high dimensional stability under heat and moisture make it suitable for a large variety of high-end applications. MECHANICAL PROPERTIES Compression: Strength: 300 PSI Modulus: 18.5 KSI Plate shear: Strength (PSI "L" direc): 160 Strength (PSI "W" direc): 90 Modulus (KSI "L" direc): 5.3 Modulus (KSI "W" direc): 3.1 Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 3 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify. DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request.   Intrastat Number for this product: 4823909000..

nomex aramid honeycomb 48 kg 3 mm, nomex honeycomb panel Aramid honeycomb Nomex or equivalent   Panel minimum size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2 Thickness: 3 mm Density: 48 kg / m3 Cell size: 3.2 mm (hexagonal)   Ultra lightweight, aramid honeycomb used in sandwich constructions. Unlike metals, Nomex provides galvanic corrosion resistance (also against corrosion of metal inserts) and allows the use of carbon skins. Other definite advantages are low thermal expansion and conductivity and high heat and fire resistance. Its superior mechanical properties and high dimensional stability under heat and moisture make it suitable for a large variety of high-end applications. MECHANICAL PROPERTIES Compression: Strength: 300 PSI Modulus: 18.5 KSI Plate shear: Strength (PSI "L" direc): 160 Strength (PSI "W" direc): 90 Modulus (KSI "L" direc): 5.3 Modulus (KSI "W" direc): 3.1   Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 3 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify. DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request.   Intrastat Number for this product: 4823909000..

nomex aramid honeycomb 48 kg 4 mm, nomex honeycomb panel Aramid honeycomb Nomex or equivalent   Panel minimum size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2 Thickness: 4 mm Density: 48 kg / m3 Cell size: 3.2 mm (hexagonal)   Ultra lightweight, aramid honeycomb used in sandwich constructions. Unlike metals, Nomex provides galvanic corrosion resistance (also against corrosion of metal inserts) and allows the use of carbon skins. Other definite advantages are low thermal expansion and conductivity and high heat and fire resistance. Its superior mechanical properties and high dimensional stability under heat and moisture make it suitable for a large variety of high-end applications. MECHANICAL PROPERTIES Compression: Strength: 300 PSI Modulus: 18.5 KSI Plate shear: Strength (PSI "L" direc): 160 Strength (PSI "W" direc): 90 Modulus (KSI "L" direc): 5.3 Modulus (KSI "W" direc): 3.1   Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 3 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify. DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request.   Intrastat Number for this product: 4823909000..

nomex aramid honeycomb 48 kg 5 mm, nomex honeycomb panel Aramid honeycomb, Nomex or equivalent   Panel minimum size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2 Thickness: 5 mm Density: 48 kg / m3 Cell size: 3.2 mm (hexagonal)   Ultra lightweight, aramid honeycomb used in sandwich constructions. Unlike metals, Nomex provides galvanic corrosion resistance (also against corrosion of metal inserts) and allows the use of carbon skins. Other definite advantages are low thermal expansion and conductivity and high heat and fire resistance. Its superior mechanical properties and high dimensional stability under heat and moisture make it suitable for a large variety of high-end applications. MECHANICAL PROPERTIES Compression: Strength: 300 PSI Modulus: 18.5 KSI Plate shear: Strength (PSI "L" direc): 160 Strength (PSI "W" direc): 90 Modulus (KSI "L" direc): 5.3 Modulus (KSI "W" direc): 3.1   Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 3 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify. DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request.   Intrastat Number for this product: 4823909000..

nomex aramid honeycomb 48 kg 7 mm, nomex honeycomb panel Aramid honeycomb, Nomex or equivalent   Panel minimum size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2 Thickness: 7 mm Density: 48 kg / m3 Cell size: 3.2 mm (hexagonal)   Ultra lightweight, aramid honeycomb used in sandwich constructions. Unlike metals, Nomex provides galvanic corrosion resistance (also against corrosion of metal inserts) and allows the use of carbon skins. Other definite advantages are low thermal expansion and conductivity and high heat and fire resistance. Its superior mechanical properties and high dimensional stability under heat and moisture make it suitable for a large variety of high-end applications. MECHANICAL PROPERTIES Compression: Strength: 150 PSI Modulus: 11 KSI Plate shear: Strength (PSI "L" direc): 100 Strength (PSI "W" direc): 55 Modulus (KSI "L" direc): 4.3 Modulus (KSI "W" direc): 2.1   Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 3 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify. DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request.   Intrastat Number for this product: 4823909000..

nomex aramid honeycomb 48 kg 8 mm, nomex honeycomb panel Aramid honeycomb, Nomex or equivalent   Panel minimum size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2 Thickness: 8 mm Density: 48 kg / m3 Cell size: 3.2 mm (hexagonal)   Ultra lightweight, aramid honeycomb used in sandwich constructions. Unlike metals, Nomex provides galvanic corrosion resistance (also against corrosion of metal inserts) and allows the use of carbon skins. Other definite advantages are low thermal expansion and conductivity and high heat and fire resistance. Its superior mechanical properties and high dimensional stability under heat and moisture make it suitable for a large variety of high-end applications. MECHANICAL PROPERTIES Compression: Strength: 150 PSI Modulus: 11 KSI Plate shear: Strength (PSI "L" direc): 100 Strength (PSI "W" direc): 55 Modulus (KSI "L" direc): 4.3 Modulus (KSI "W" direc): 2.1   Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 3 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify. DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request.   Intrastat Number for this product: 4823909000..

nomex aramid honeycomb 48 kg 10 mm, nomex honeycomb panel Aramid honeycomb, Nomex or equivalent   Panel minimum size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2 Thickness: 10 mm Density: 48 kg / m3 Cell size: 3.2 mm (hexagonal)   Ultra lightweight, aramid honeycomb used in sandwich constructions. Unlike metals, Nomex provides galvanic corrosion resistance (also against corrosion of metal inserts) and allows the use of carbon skins. Other definite advantages are low thermal expansion and conductivity and high heat and fire resistance. Its superior mechanical properties and high dimensional stability under heat and moisture make it suitable for a large variety of high-end applications. MECHANICAL PROPERTIES Compression: Strength: 300 PSI Modulus: 18.5 KSI Plate shear: Strength (PSI "L" direc): 160 Strength (PSI "W" direc): 90 Modulus (KSI "L" direc): 5.3 Modulus (KSI "W" direc): 3.1 Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 3 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify. DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request.   Intrastat Number for this product: 4823909000..

nomex aramid honeycomb 48 kg 20 mm, nomex honeycomb panel Aramid honeycomb, Nomex or equivalent   Panel minimum size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2 Thickness: 20 mm Density: 48 kg / m3 Cell size: 3.2 mm (hexagonal)   Ultra lightweight, aramid honeycomb used in sandwich constructions. Unlike metals, Nomex provides galvanic corrosion resistance (also against corrosion of metal inserts) and allows the use of carbon skins. Other definite advantages are low thermal expansion and conductivity and high heat and fire resistance. Its superior mechanical properties and high dimensional stability under heat and moisture make it suitable for a large variety of high-end applications. MECHANICAL PROPERTIES Compression: Strength: 150 PSI Modulus: 11 KSI Plate shear: Strength (PSI "L" direc): 100 Strength (PSI "W" direc): 55 Modulus (KSI "L" direc): 4.3 Modulus (KSI "W" direc): 2.1   Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 3 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify. DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request.   Intrastat Number for this product: 4823909000..

nomex aramid honeycomb 48 kg 25 mm, nomex honeycomb panel Aramid honeycomb, Nomex or equivalent   Panel minimum size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2 Thickness: 25 mm Density: 48 kg / m3 Cell size: 3.2 mm (hexagonal)   Ultra lightweight, aramid honeycomb used in sandwich constructions. Unlike metals, Nomex provides galvanic corrosion resistance (also against corrosion of metal inserts) and allows the use of carbon skins. Other definite advantages are low thermal expansion and conductivity and high heat and fire resistance. Its superior mechanical properties and high dimensional stability under heat and moisture make it suitable for a large variety of high-end applications. MECHANICAL PROPERTIES Compression: Strength: 150 PSI Modulus: 11 KSI Plate shear: Strength (PSI "L" direc): 100 Strength (PSI "W" direc): 55 Modulus (KSI "L" direc): 4.3 Modulus (KSI "W" direc): 2.1   Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 3 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify. DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request.   Intrastat Number for this product: 4823909000..

nomex aramid honeycomb 48 kg 30 mm, nomex honeycomb panel Aramid honeycomb, Nomex or equivalent   Panel minimum size: 1250 X 2500 mm Total surface of 1 panel: 3.125 m2 Thickness: 30 mm Density: 48 kg / m3 Cell size: 3.2 mm (hexagonal)   Ultra lightweight, aramid honeycomb used in sandwich constructions. Unlike metals, Nomex provides galvanic corrosion resistance (also against corrosion of metal inserts) and allows the use of carbon skins. Other definite advantages are low thermal expansion and conductivity and high heat and fire resistance. Its superior mechanical properties and high dimensional stability under heat and moisture make it suitable for a large variety of high-end applications. MECHANICAL PROPERTIES Compression: Strength: 150 PSI Modulus: 11 KSI Plate shear: Strength (PSI "L" direc): 100 Strength (PSI "W" direc): 55 Modulus (KSI "L" direc): 4.3 Modulus (KSI "W" direc): 2.1   Packing info: In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 3 mm) or cut them, for example in the middle or in 3 pieces. If you like to have your panel(s) cut in other dimensions, please specify. DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request.   Intrastat Number for this product: 4823909000..

cork sheet 140 kg 5 mm Cork sheet is a natural, eco-friendly and sustainable core material for composite applications, easily integrated into fast production cycles due to its low density, very good temperature resistance and good drape characteristics (flexibility). Cork is perfectly aligned with green specifications, and suitable for hand layup, vacuum bagging and infusion processes.   Width: 1.00 m Thickness: 5 mm Density: 140 kg / m3 MECHANICAL PROPERTIES Compressive strength (MPa): 0.30 Compressive modulus (MPa): 5.10 Tensile strength (MPa): 0.60 Shear strength (MPa): 0.90 Shear modulus (MPa): 5.9 Thermal conductivity (w/mk): 0.042 Loss Factor (1KHz): 0.022 Maximum Processing Temperature: 180 oC Vacuum Bag Processing: up to 150 oC FEATURES & BENEFITS Closed air filled cell structure Low water absorption Rot resistance Excellent FST (fire, smoke and toxicity) properties High level of noise and vibration attenuation   Intrastat Number for this product: 45020000..