embossing film for prepreg, film for prepreg release, prepreg film for release
Embossing film, with lighter imprinted texture, used to facilitate the impregnation of prepregs, usually with SR8500 / KTA311 (but also other, colder curing) epoxy systems. It is texturized in such a way so to facilitate air to escape, or drive air out of the impregnating laminate. It is also used as a protective liner that separates prepreg layers.
Technical characteristics
Width: 1.30 meters
Thickness: 50 μ
Intrastat Number for this product: 39206212..
1.12€
embossing film for prepreg, film for prepreg release, prepreg film for release
Embossing film, with heavier imprinted texture, used to facilitate the impregnation of prepregs, usually with SR8500 / KTA311 (but also other, colder curing) epoxy systems. It is texturized in such a way so to facilitate air to escape, or drive air out of the impregnating laminate. It is also used as a protective liner that separates prepreg layers.
Technical characteristics
Width: 1.30 meters
Thickness: 70 μ
Intrastat Number for this product: 39206212..
1.56€
hi-shrink tape, dunston hi-shrink tape, heat shrink tape
Heat shrink tape for manufacturing prepreg wrapped tubes. High shrink and compaction force, release coated both sides. Can withstand temperatures up to 140 - 150 oC. Suitable for in or out of autoclave curing. Also suitable for room temperature, heat gun (self-made prepreg) application. Specialized widths of tapes, different diameters of inner carton core and different grades of shrink films are offered upon request.
Technical characteristics
Width: 25 mm
Density: 91 g/m3, 27 g/m2
Roll weight: 0.75 kg
Thickness: 30 micron (for reduced step)
Inner diameter of core papertube: 70 mm
Outer diameter of reel: 250 mm
Intrastat Number for this product: 39209959..
21.10€
carbon fiber 3k tr30s 3la1
Carbon fiber type: 3K TR30S 3L A1
Total weight: 1.8 kg
Total length: 5,000.00 m
MECHANICAL PROPERTIES OF 3K TR30S CARBON FIBER
Tensile strength (MPa): 4433
Tensile modulus (GPa): 231
Elongation at break (%): 1.8
DISCLAIMER
All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. Fibremax Ltd reserves the right to change yarns, specifications, and all information given herein, without notice. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses.
Intrastat Number for this product: 68151200..
148.50€
Carbon fiber type: 12K
Total weight: 4 kg
Total length: 4,000.00 m
MECHANICAL PROPERTIES OF 12Κ CARBON FIBER
Tensile strength (MPa): 4500
Tensile modulus (GPa): 230
Elongation at break (%): 1.9
DISCLAIMER
All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. Fibremax Ltd reserves the right to change yarns, specifications, and all information given herein, without notice. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses.
Intrastat Number for this product: 68151200..
98.40€
Carbon fiber type: 12K
Total weight: 4 kg
Total length: 4,000.00 m
MECHANICAL PROPERTIES OF 12Κ CARBON FIBER
Tensile strength (MPa): 4900
Tensile modulus (GPa): 230
Elongation at break (%): 2.1
DISCLAIMER
All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. Fibremax Ltd reserves the right to change yarns, specifications, and all information given herein, without notice. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses.
Intrastat Number for this product: 68151200..
145.60€
Fiberglass type: EC13 272 Z20 899
Total weight: 8.10 kg
TECHNICAL CHARACTERISTICS OF EC13 272 Z20 899 FIBERGLASS
Linear density (tex): 272
Loss on ignition (%): 0.90
Breaking force (N): 150
Twist (t/m): 20
DISCLAIMER
All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. Fibremax Ltd reserves the right to change yarns, specifications, and all information given herein, without notice. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses.
Intrastat Number for this product: 70196100..
49.55€
Fiberglass type: EC11 102 Z28 899
Total weight: 8.10 kg
TECHNICAL CHARACTERISTICS OF EC9 136 Z28 FIBERGLASS
Linear density (tex): 102
Loss on ignition (%): 0.75
Breaking force (N): 55
Twist (t/m): 28
DISCLAIMER
All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. Fibremax Ltd reserves the right to change yarns, specifications, and all information given herein, without notice. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses.
Intrastat Number for this product: 70196100..
53.28€
red pigment for epoxy resin, red color for epoxy resin, red color for polyester resin, red pigment for polyester resin
(container of 1 kg)
Highly concentrated bright reactive pigment designed for tinting epoxy systems. Liquid for easy mixing, it can also be used for other resin systems (and polyester).
Conversion data: 1 kg = 2.2 lbs = 35.3 oz
Intrastat Number for this product: 32041700..
32.76€
blue pigment for epoxy resin, blue color for epoxy resin, blue color for polyester resin, blue pigment for polyester resin
(container of 1 kg)
Highly concentrated bright reactive pigment designed for tinting epoxy systems. Liquid for easy mixing, it can also be used for other resin systems (and polyester).
Conversion data: 1 kg = 2.2 lbs = 35.3 oz
Intrastat Number for this product: 32041700..
28.34€
yellow pigment for epoxy resin, yellow color for epoxy resin, yellow color for polyester resin, yellow pigment for polyester resin
(container of 1 kg)
Highly concentrated bright reactive pigment designed for tinting epoxy systems. Liquid for easy mixing, it can also be used for other resin systems (and polyester).
Conversion data: 1 kg = 2.2 lbs = 35.3 oz
Intrastat Number for this product: 32041700..
33.26€
white pigment for epoxy resin, white color for epoxy resin, white color for polyester resin, white pigment for polyester resin
(container of 1 kg)
Highly concentrated bright reactive pigment designed for tinting epoxy systems. Liquid for easy mixing, it can also be used for other resin systems (and polyester).
Conversion data: 1 kg = 2.2 lbs = 35.3 oz
Intrastat Number for this product: 32041700..
20.71€
black pigment for epoxy resin, black color for epoxy resin, black color for polyester resin, black pigment for polyester resin
(container of 1 kg)
Highly concentrated dark reactive pigment designed for tinting epoxy systems. Liquid for easy mixing, it can also be used for other resin systems (and polyester).
Conversion data: 1 kg = 2.2 lbs = 35.3 oz
Intrastat Number for this product: 32041700..
23.02€
fabric adhesive spray, glue spray, fabric glue spray, clear fabric glue spray, composites adhesive spray, composites glue spray
Container of 500 ml
Spray adhesive developed for the infusion moulding industry. It provides instant adhesion, effectively securing reinforcing fibers while promoting a high-quality surface finish in carbon fibre applications, supported by its fine mist spray pattern. It is compatible with polyester, styrene, and vinyl ester resins, and has also been successfully tested with epoxy systems.
USAGE
Designed for single-sided application. For optimal performance, ensure that both the spray and the surfaces to be bonded are at a temperature between 16°C and 27°C.
Use only in well-ventilated areas.
Before full application, test compatibility by applying a small amount of adhesive to a sample area of the substrate. This product may adversely affect certain materials.
Intrastat Number for this product: 35069900..
From 7.29€ ...to 8.18€
fabric adhesive spray, glue spray, fabric glue spray, clear fabric glue spray, composites adhesive spray, composites glue spray
Container of 600 ml
SPRAY ADHESIVE MADE BY EPOXY RESIN
Securely bonds most lightweight composite materials e.g. reinforcement fabrics, resin films and prepregs, polystyrene and PVC foam. It exhibits light color, that is unobtrusive and non staining on the final product. It can be used for permanent or temporary bonds. It is compatible with with both dry fabrics and prepreg, and can withstand high temperature curing without visual cosmetic defect.
Conversion data: 1 kg = 2.2 lbs = 35.3 oz, 1 lt = 0.91 qt = 20 fl oz
Intrastat Number for this product: 35069900..
From 29.80€ ...to 33.12€
fabric adhesive spray, glue spray, fabric glue spray, clear fabric glue spray, composites adhesive spray, composites glue spray
Container of 500 ml
High-tack spray adhesive developed for infusion and RTM lay-up applications, featuring a web spray pattern. It offers a very fast flash-off time for efficient operator use, combined with a long open time to maximize workability. Suitable for all types of glass fibre mat and is particularly effective with heavy mats in demanding dry lay-up areas. It is also ideal for tacking vacuum consumables in place. Not recommended for use with epoxy resins (not soluable).
USAGE
Designed for single- or double sided application. For optimal performance, ensure that both the spray and the surfaces to be bonded are at a temperature between 16°C and 27°C.
Use only in well-ventilated areas.
Before full application, test compatibility by applying a small amount of adhesive to a sample area of the substrate. This product may adversely affect certain materials.
Intrastat Number for this product: 35069900..
From 8.25€ ...to 9.25€
Showing 1 to 16 of 16 (1 Pages)