Your Cart

C285T4pp Carbon prepreg General purpose

C285T4pp Carbon prepreg General purpose  Prepregs
C285T4pp Carbon prepreg General purpose
61.90€ / m2
QuantitiesPrices
(ex. VAT)
1 - 40 m261.90€
≥40 m253.10€

Available Options

 
Carbon prepreg C285T4pp, general purpose
 
TECHNICAL CHARACTERISTICS
Fabric weight: 285 g / m2
Width: 1.00 meter
Weaving style: Twill 4X4
Warp: 3K T300 carbon fiber, 50%, 7 ends (threads) / cm
Weft: 3K T300 carbon fiber, 50%, 7 ends / cm
 
Prepreg weight: 510 g / m2
Epoxy content: 44%
Gel time at 125 oC: 6-9 min
Volatile content: < 1 %
 
Fibermax general purpose prepregs are based on a 80 to 150 oC (176 - 302 oF) curing toughened epoxy matrix, suited for both autoclave and press molding applications. A standard autoclave curing cycle is: Draw vacuum (0.6 - 0.7 bar) and apply positive pressure. Then start heating - typically 2-5 oC / min (3.5 - 9 oF) - till 120 oC (248 oF) and then hold this temperature for 1 hour. Turn off the temperature and cool under pressure to 60 oC (140 oF). When fully cooled open the bag and extract the piece.
 
STORAGE LIFE
12 months at - 18 oC
5 weeks at room temperature
Allow prepreg roll to reach room temperature before opening plastic bag to prevent condensation.
 
EVALUATED Tg FOR SUGGESTED CURING CYCLE
1 hour at 125 oC: 120 - 125 oC
2 hours at 110 oC: 120 - 125 oC
 
TYPICAL MECHANICAL PROPERTIES OF LAMINATE
Cured by hot press technology at 125 oC curing cycle
Flexural strength (Mpa): 805
Flexural modulus (Gpa): 51
ILSS - Short Beam Shear (Mpa): 61
 
Please click on picture, for a closer view to the fabric's real size. To realize actual size with precision please observe the threads / cm feature mentioned above.
 
DISCLAIMER
All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. Fibremax Ltd reserves the right to make modifications on fabrics, change yarns, specifications, and all information given herein, without notice. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request with roll serial number.

 

Intrastat Number for this product: 68151200

Fabric MDS
Yarn MDS