Your Cart

Unidirectional

  Carbon prepreg C330Upp, general purpose   TECHNICAL CHARACTERISTICS Fabric weight: 324 g / m2 Width: 1.00 meter Weaving style: Unidirectional Warp: HTS 45 E23 12K carbon fiber, 93.33%, 3.80 ends (threads) / cm Weft: E Glass EC9 68tex, 6.67%, 3.00 ends / cm   Prepreg weight: 540 g / m2 Epoxy content: 40% Gel time at 125 oC: 6-9 min Volatile content: < 1 %   Fibermax general purpose prepregs are based on a 80 to 150 oC (176 - 302 oF) curing toughened epoxy matrix, suited for both autoclave and press molding applications. A standard autoclave curing cycle is: Draw vacuum (0.6 - 0.7 bar) and apply positive pressure. Then start heating - typically 2-5 oC / min (3.5 - 9 oF) - till 120 oC (248 oF) and then hold this temperature for 1 hour. Turn off the temperature and cool under pressure to 60 oC (140 oF). When fully cooled open the bag and extract the piece.   STORAGE LIFE 12 months at - 18 oC 5 weeks at room temperature Allow prepreg roll to reach room temperature before opening plastic bag to prevent condensation.   EVALUATED Tg FOR SUGGESTED CURING CYCLE 1 hour at 125 oC: 120 - 125 oC 2 hours at 110 oC: 120 - 125 oC   TYPICAL MECHANICAL PROPERTIES OF LAMINATE Cured by hot press technology at 125 oC curing cycle Flexural strength (Mpa): 1150 Flexural modulus (Gpa): 115 ILSS - Short Beam Shear (Mpa): 73   Please click on picture, for a closer view to the fabric's real size. To realize actual size with precision please observe the threads / cm feature mentioned above.   DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. Fibremax Ltd reserves the right to make modifications on fabrics, change yarns, specifications, and all information given herein, without notice. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request with roll serial number.   Intrastat Number for this product: 68151200..
From 38.16€ ...to 46.96€
  Carbon prepreg C420Upp, general purpose, 40 m2 roll   Price: 1716.96 EUR / 40 m2 roll Price / m2: 42.92 EUR   TECHNICAL CHARACTERISTICS Fabric weight: 420 g / m2 Width: 1.00 meter Weaving style: Unidirectional, woven Warp: 12K TR50S carbon fiber, 92%, 5.00 ends (threads) / cm Weft: Glass thermoplastic 8%, 1.60 ends (threads) / cm   Prepreg weight: 680 g / m2 Epoxy content: 38% Gel time at 125 oC: 11 min Volatile content: < 1%   Fibermax general purpose prepregs are based on a 80 to 150 oC (176 - 302 oF) curing toughened epoxy matrix, suited for both autoclave and press molding applications. A standard autoclave curing cycle is: Draw vacuum (0.6 - 0.7 bar) and apply positive pressure. Then start heating - typically 2-5 oC / min (3.5 - 9 oF) - till 120 oC (248 oF) and then hold this temperature for 1 hour. Turn off the temperature and cool under pressure to 60 oC (140 oF). When fully cooled open the bag and extract the piece.   STORAGE LIFE 12 months at - 18 oC 4 - 6 weeks at room temperature Allow prepreg roll to reach room temperature before opening plastic bag to prevent condensation.   EVALUATED Tg FOR RESPECTIVE CURING CYCLE 1 hour at 120 oC (248 oF): 110 - 120 oC (230 - 248 oF) 1 hour at 130 oC (266 oF): 130 - 140 oC (266 - 284 oF) 10 min at 150 oC (302 oF): 130 - 150 oC (266 - 302 oF)   TYPICAL MECHANICAL PROPERTIES OF LAMINATE Cured at 130 oC for 60 minutes and 3 bar Flexural strength (Mpa): 850 Flexural modulus (Gpa): 59 Tensile strength (MPa): 650 Tensile modulus (GPa): 59 ILSS - Short Beam Shear (Mpa): 65 Tg (DSC) 20 oC / min: 140 oC   Please click on picture, for a closer view to the fabric's real size. To realize actual size with precision please observe the threads / cm feature mentioned above.   DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. Fibremax Ltd reserves the right to make modifications on fabrics, change yarns, specifications, and all information given herein, without notice. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request with roll serial number.   Intrastat Number for this product: 68151200..
1,716.96€
Showing 1 to 2 of 2 (1 Pages)