Miscellaneous

ptfe fiberglass, ptfe glass fabric for vacuum bagging, teflon fiberglass for vacuum bagging, ptfe fibreglass for infusion, autoclave, composite lamination Self Adhesive PTFE Glass Fabric is a material consisting of a layer of PTFE (polytetrafluoroethylene, commonly known as Teflon) coated glass fabric with an adhesive backing. PTFE is known for its non-stick properties and resistance to high temperatures and chemicals. The adhesive film simplifies the installation, ensuring secure attachment to surfaces without the need for additional adhesives or bonding agents. This combination offers a versatile solution for applications requiring both strength and non-stick properties, making it suitable for a wide range of industrial applications.   Technical characteristics Weight (fabric): 220 g/m² Width: 1.00 m PTFE content: 60% Thickness (fabric): 0,13 mm Adhesive type: Silicone Adhesive thickness: 0.06 mm Max. use temperature: up to 260°C (500 oF)   DIRECTIONS OF USE Prepare the surface by cleaning it thoroughly. Cut the fabric to the desired size, then peel off the backing to expose the adhesive side. Apply the adhesive side of the fabric firmly onto the surface, ensuring proper adhesion.   Intrastat Number for this product: 54071000..

ptfe fiberglass, ptfe glass fabric for vacuum bagging, teflon fiberglass for vacuum bagging, ptfe fibreglass for infusion, autoclave, composite lamination PTFE Glass fabric is a type of material where glass fabric is coated with a layer of PTFE (polytetrafluoroethylene), commonly known as Teflon. This version features a porous structure. This porous structure allows air or fluids to pass through the fabric while maintaining the properties of PTFE, such as non-stick properties, resistance to high temperatures, and chemical inertness. Porous PTFE coated glass fabric is designed for applications where breathability, the ability to transmit fluids or gases and release properties are required, for vacuum bag lay-up composites and metal-to-metal bonding structures.   Technical characteristics: Areal weight: 80 g / m² Width: 1.00 m Thickness: 0.07 mm Porosity: 20 - 40% PTFE content: 20% Max use temperature: up to 260 oC (500 oF)   Intrastat Number for this product: 54071000..

embossing film for prepreg, film for prepreg release, prepreg film for release Embossing film, with lighter imprinted texture, used to facilitate the impregnation of prepregs, usually with SR8500 / KTA311 (but also other, colder curing) epoxy systems. It is texturized in such a way so to facilitate air to escape, or drive air out of the impregnating laminate. It is also used as a protective liner that separates prepreg layers.   Technical characteristics Width: 1.30 meters Thickness: 50 μ   Intrastat Number for this product: 39206212..

hi-shrink tape, dunston hi-shrink tape, heat shrink tape Heat shrink tape for manufacturing prepreg wrapped tubes. High shrink and compaction force, release coated both sides. Can withstand temperatures up to 140 - 150 oC. Suitable for in or out of autoclave curing. Also suitable for room temperature, heat gun (self-made prepreg) application. Specialized widths of tapes, different diameters of inner carton core and different grades of shrink films are offered upon request. Technical characteristics Width: 25 mm Density: 91 g/m3, 27 g/m2 Roll weight: 0.75 kg Thickness: 30 micron (for reduced step) Inner diameter of core papertube: 70 mm Outer diameter of reel: 250 mm   Intrastat Number for this product: 39209959..

carbon fiber 3k tr30s 3la1 Carbon fiber type: 3K TR30S 3L A1 Total weight: 1.8 kg Total length: 5,000.00 m MECHANICAL PROPERTIES OF 3K TR30S CARBON FIBER Tensile strength (MPa): 4433 Tensile modulus (GPa): 231 Elongation at break (%): 1.8 DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. Fibremax Ltd reserves the right to change yarns, specifications, and all information given herein, without notice. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses.   Intrastat Number for this product: 68151200..

  Carbon fiber type: 12K Total weight: 4 kg Total length: 4,000.00 m MECHANICAL PROPERTIES OF 12Κ CARBON FIBER Tensile strength (MPa): 4500 Tensile modulus (GPa): 230 Elongation at break (%): 1.9 DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. Fibremax Ltd reserves the right to change yarns, specifications, and all information given herein, without notice. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses.   Intrastat Number for this product: 68151200..

  Fiberglass type: EC9 136 Z28 TD37C Total weight: 5.90 kg TECHNICAL CHARACTERISTICS OF EC9 136 Z28 FIBERGLASS Linear density (tex): 136 Loss on ignition (%): 0.60 Breaking force (N): 95 Twist (t/m): 28 DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. Fibremax Ltd reserves the right to change yarns, specifications, and all information given herein, without notice. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses.   Intrastat Number for this product: 70196100..

  Fiberglass type: EC11 102 Z28 899 Total weight: 8.10 kg TECHNICAL CHARACTERISTICS OF EC9 136 Z28 FIBERGLASS Linear density (tex): 102 Loss on ignition (%): 0.75 Breaking force (N): 55 Twist (t/m): 28 DISCLAIMER All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. Fibremax Ltd reserves the right to change yarns, specifications, and all information given herein, without notice. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses.   Intrastat Number for this product: 70196100..

red pigment for epoxy resin, red color for epoxy resin, red color for polyester resin, red pigment for polyester resin (container of 1 kg) Highly concentrated bright reactive pigment designed for tinting epoxy systems. Liquid for easy mixing, it can also be used for other resin systems (and polyester). Conversion data: 1 kg = 2.2 lbs = 35.3 oz   Intrastat Number for this product: 32041700..

yellow pigment for epoxy resin, yellow color for epoxy resin, yellow color for polyester resin, yellow pigment for polyester resin (container of 1 kg) Highly concentrated bright reactive pigment designed for tinting epoxy systems. Liquid for easy mixing, it can also be used for other resin systems (and polyester). Conversion data: 1 kg = 2.2 lbs = 35.3 oz   Intrastat Number for this product: 32041700..

white pigment for epoxy resin, white color for epoxy resin, white color for polyester resin, white pigment for polyester resin (container of 1 kg) Highly concentrated bright reactive pigment designed for tinting epoxy systems. Liquid for easy mixing, it can also be used for other resin systems (and polyester).   Conversion data: 1 kg = 2.2 lbs = 35.3 oz   Intrastat Number for this product: 32041700..

black pigment for epoxy resin, black color for epoxy resin, black color for polyester resin, black pigment for polyester resin (container of 1 kg) Highly concentrated dark reactive pigment designed for tinting epoxy systems. Liquid for easy mixing, it can also be used for other resin systems (and polyester). Conversion data: 1 kg = 2.2 lbs = 35.3 oz   Intrastat Number for this product: 32041700..

fabric adhesive spray, glue spray, fabric glue spray, clear fabric glue spray, composites adhesive spray, composites glue spray Container of 500 ml   High-tack spray adhesive developed for infusion and RTM lay-up applications, featuring a web spray pattern. It offers a very fast flash-off time for efficient operator use, combined with a long open time to maximize workability. Suitable for all types of glass fibre mat and is particularly effective with heavy mats in demanding dry lay-up areas. It is also ideal for tacking vacuum consumables in place. Not recommended for use with epoxy resins (not soluable).   USAGE Designed for single- or double sided application. For optimal performance, ensure that both the spray and the surfaces to be bonded are at a temperature between 16°C and 27°C. Use only in well-ventilated areas. Before full application, test compatibility by applying a small amount of adhesive to a sample area of the substrate. This product may adversely affect certain materials.   Intrastat Number for this product: 35069900..

fabric adhesive spray, glue spray, fabric glue spray, clear fabric glue spray, composites adhesive spray, composites glue spray, spray 3m 77 Container of 500 ml   Immobilizes fabrics on molds before impregnation, mostly for infusion. It can be used for hand-layup where unhandy angles make impregnation very difficult. Dry fabrics sprayed, become self adhesive. Net weight: 0.35 g Conversion data: 1 kg = 2.2 lbs = 35.3 oz | 1 lt = 0.91 qt = 20 fl oz   Intrastat Number for this product: 35069900..