Your Cart

Consumables

  VC006 is a Nylon peel ply release fabric suitable for use with different resin systems and a range of technologies like autoclave, vacuum bagging, infusion and hand lamination.   Nylon 6 peelply Weight: 60 g / m2 Width: 1.50 meters Max using temperature: 170 oC (338 oF)   Usage recommendation: To avoid amine, dust or other contamination of the application surface or cured substrate, do not remove cured peel ply before continuing the lamination or paintwork. For easiest peeling properties do not remove before full cure (the harder the resin system, the easier the peeling)   Best storage recommendations: Store in a cool and dry environment. Recommended temperature range of storage is between 10 - 30 °C and relative humidity between 50 - 75%. Keep in the original packaging until use.    Intrastat Number for this product: 54071000..
From 1.85€ ...to 2.77€
  VC007 is a Nylon peel ply release fabric suitable for use with different resin systems and a range of technologies like autoclave, vacuum bagging, infusion and hand lamination.   Material: Nylon 66 Weight: 68 g / m2 Available widths: 1.50 meters Max using temperature: 200 oC   Usage recommendation: To avoid amine, dust or other contamination of the application surface or cured substrate, do not remove cured peel ply before continuing the lamination or paintwork. For easiest peeling properties do not remove before full cure (the harder the resin system, the easier the peeling)   Best storage recommendations: Store in a cool and dry environment. Recommended temperature range of storage is between 10 - 30 °C and relative humidity between 50 - 75%. Keep in the original packaging until use.   Intrastat Number for this product: 54071000..
From 2.48€ ...to 3.40€
  VC009 is a Nylon peel ply release fabric suitable for use with different resin systems and a range of technologies like autoclave, vacuum bagging, infusion and hand lamination.   Material: Nylon 66 Weight: 85 g / m2 Available widths: 0.80, 1.00, 1.20 and 1.60 meters (for other widths go to peelply tapes) Max using temperature: 200 oC   Usage recommendation: To avoid amine, dust or other contamination of the application surface or cured substrate, do not remove cured peel ply before continuing the lamination or paintwork. For easiest peeling properties do not remove before full cure (the harder the resin system, the easier the peeling)   Best storage recommendations: Store in a cool and dry environment. Recommended temperature range of storage is between 10 - 30 °C and relative humidity between 50 - 75%. Keep in the original packaging until use.    Intrastat Number for this product: 54071000..
From 1.65€ ...to 2.57€
  Width: 1.50 meter Thickness: 30μ Density of perforation (step): Every 50 mm Average size of perforation: 0.38 mm Max temp: 170 oC (338 oF)   Intrastat Number for this product: 54071000..
0.42€
  Width: 1.50 meters Film thickness: 30 μ Density of perforation: Every 10 mm Average size of perforation: 0.5 mm Max temp: 168 oC   Intrastat Number for this product: 54071000..
0.40€
  Width: 0.50, 1.00 and 1.50 meters Film thickness: 45 μ Density of perforation: Every 10 mm Average size of perforation: 0.4 mm Max temp: 120 oC (248 oF)   More suitable for use with pre-impregnated   Intrastat Number for this product: 54071000..
0.63€
  Width: 1.50 meter Thickness: 30 μ Density of perforation (step): Every 5 mm Average size of perforation: 0.8 mm Max temp: 170 oC (338 oF)   Intrastat Number for this product: 54071000..
0.42€
  Width: 1.50 meter Thickness: 30 μ Density of perforation (step): Every 10 mm Average size of perforation: 0.4 mm Max temp: 170 oC (338 oF)   More suitable for use with pre-impregnated   Intrastat Number for this product: 54071000..
0.42€
  FEP release film HT 260 is ideal for direct laminate contact, offering high durability and conformity. With excellent release properties, it peels off easily after the vacuum bagging processes. Its high elongation and suitability for temperatures up to 260 °C make it versatile for various high-performance applications. Technical characteristics: Specific weight: 2.18 g / cm3 Width: 1.20 m Thickness: 25 micron Hardness: 55 - 61 shore D Tensile strength: > 30 N/mm2 Elongation: > 400% Temperature: -200 / +260 °C (-328 / +500 °F)   Intrastat Number for this product: 54071000..
From 2.53€ ...to 3.38€
  VC014 is a non-woven breather/bleader fabric made with polyester fibrous material, ideally suited for ventilation and absorption of excess matrix. It can be used at ambient and high temperature applications, both for vacuum bagging, autoclave and more applications. Due to its multidirectional high elongation and drapability this breather fabric is able to follow the most complex lamination surfaces.   Technical characteristics: Material: Polyester non-woven Weight: 150 g / m2 Thickness: 1.6 mm Max use temperature: 180 oC Width: 1.00 and 1.50 meters   DIRECTIONS OF USE Pre-production trials are recommended to confirm suitability with your unique laminate schedules and processes. It can be used in multiple layers to increase resin absorption capacity. Different areal weights with analogous resin absorption capacity are available upon request.   Intrastat Number for this product: 54071000..
From 0.91€ ...to 1.83€
  Self Adhesive PTFE Glass Fabric is a material consisting of a layer of PTFE (polytetrafluoroethylene, commonly known as Teflon) coated glass fabric with an adhesive backing. PTFE is known for its non-stick properties and resistance to high temperatures and chemicals. The adhesive film simplifies the installation, ensuring secure attachment to surfaces without the need for additional adhesives or bonding agents. This combination offers a versatile solution for applications requiring both strength and non-stick properties, making it suitable for a wide range of industrial applications.   Technical characteristics: Weight (fabric): 270 g/m² Width: 1.00 m PTFE content: 60% Thickness (fabric): 0,13 mm Adhesive type: Silicone Adhesive thickness: 0.06 mm Max. use temperature: up to 260°C   DIRECTIONS OF USE Prepare the surface by cleaning it thoroughly. Cut the fabric to the desired size, then peel off the backing to expose the adhesive side. Apply the adhesive side of the fabric firmly onto the surface, ensuring proper adhesion.   Intrastat Number for this product: 54071000..
From 20.16€ ...to 23.70€
  PTFE Glass fabric is a type of material where glass fabric is coated with a layer of PTFE (polytetrafluoroethylene), commonly known as Teflon. This version features a porous structure. This porous structure allows air or fluids to pass through the fabric while maintaining the properties of PTFE, such as non-stick properties, resistance to high temperatures, and chemical inertness. Porous PTFE coated glass fabric is designed for applications where breathability, the ability to transmit fluids or gases and release properties are required, for vacuum bag lay-up composites and metal-to-metal bonding structures.   Technical characteristics: Area weight: 80 g/m² Width: 1.27 m Thickness: 0.07 mm Porosity: 20 - 40% PTFE content: 20% Max use temperature: up to 260 oC   Intrastat Number for this product: 54071000..
From 6.47€ ...to 10.01€
  PTFE Glass fabric is a type of material where glass fabric is coated with a layer of PTFE (polytetrafluoroethylene), commonly known as Teflon. This version features a non-porous structure. This non-porous structure makes it effectively waterproof while maintaining the properties of PTFE, such as non-stick properties, resistance to high temperatures, and chemical inertness. Non-porous PTFE coated glass fabric is designed to better control surface resin on the part, for applications where moisture resistance is required, for vacuum bagging and infusion. It is compatible with epoxy, polyester and vinyl ester resin.   Technical characteristics: Area weight: 135 g/m² Width: 1.27 m Thickness: 0.08 mm PTFE content: 35% Max use temperature: up to 260 oC   Intrastat Number for this product: 54071000..
From 6.72€ ...to 10.26€
  VC016 is a flow fabric used in vacuum-assisted resin infusion processes, commonly employed in composite manufacturing. The purpose of the fabric is to distribute and control the flow of resin throughout the reinforcement material, ensuring a uniform and efficient impregnation of the fibers.   Material: flow fabric blue (soft) Width: 1.50 m Weight: 120 g / m2 Thickness: 50 μ   Intrastat Number for this product: 54071000..
From 1.73€ ...to 2.65€
  VC017 is a flow fabric used in vacuum-assisted resin infusion processes, commonly employed in composite manufacturing. The purpose of the fabric is to distribute and control the flow of resin throughout the reinforcement material, ensuring a uniform and efficient impregnation of the fibers.   Material: flow fabric green (harder) Widths: 0.90, 1.50 and 2.00 m Weight: 135 g / m2 Thickness: 60 μ   Intrastat Number for this product: 56081919..
From 1.63€ ...to 2.55€
  VC0172 is a unique combination that integrates Flow fabric & Perforated film into a single product. Besides a reduction in layup costs, it provides exceptional resin distribution properties and consistent air removal throughout the vacuum-assisted resin infusion process. Its excellent flexibility makes it an ideal choice for intricate mold designs.   Materials: blue flow fabric + pink perforated film Width: 1.45 m Weight: 190 g / m2 (± 5%) Thickness: 60 μ Max temp: 120 oC (248 oF)   Intrastat Number for this product: 56081919..
From 3.22€ ...to 4.32€
  VC0173 is a unique combination that integrates Flow fabric, Perforated film and Peel ply into a single product. Besides reducing handling times and layup costs, it offers exceptional resin distribution properties, with limited losses, and ensures consistent air removal throughout the vacuum-assisted resin infusion process. It exhibits excellent flexibility, making it an ideal choice for intricate mold designs, while its form could minimize or eliminate the need for sanding and abrading works.   Materials: blue flow fabric + pink perforated film + peelply VC009 Width: 1.52 m Weight: 260 g / m2 Thickness: 80 μ Max temp: 120 oC (248 oF)   Intrastat Number for this product: 56081919..
From 5.75€ ...to 6.67€
  Flow fabric tape “Omega” is designed especially for use with a 12-13 mm spiral tube (not included). It is stitched lengthwise three times, making it very stable and easy to place. It doesn’t leave any print on the applied surface and the tube is easily inserted. Suitable for resin infusion, CRIMP, VARTM, VAP processes and compression moulding. Technical characteristics: Material type: Polyethylene Weaving style: Knitted Roll length: 50 lm Width: 75 mm Mesh (nominal thickness): 1,1 mm Composition: 100% HDPE Monofilament yarn   Intrastat Number for this product: 56081919..
47.00€
  VC019 is a spiral tube used in resin infusion processes to facilitate the flow of resin from the resin feed tube into and around a resin infusion project. This tube is positioned, often underneath the feed line, in order to guide the resin flow into the more intricate or remote corners of the composite part. It ensures that the resin is evenly distributed throughout the entire mold or structure, reaching areas that might be harder to access through the main feed line alone. This contributes to achieving a uniform impregnation and helps prevent issues such as dry spots or uneven resin distribution in the final product. Outside diameter: 12 mm Inside diameter: 9 mm   Intrastat Number for this product: 39239000..
21.00€
  VC020 is a spiral tube used in resin infusion processes to facilitate the flow of resin from the resin feed tube into and around a resin infusion project. This tube is positioned, often underneath the feed line, in order to guide the resin flow into the more intricate or remote corners of the composite part. It ensures that the resin is evenly distributed throughout the entire mold or structure, reaching areas that might be harder to access through the main feed line alone. This contributes to achieving a uniform impregnation and helps prevent issues such as dry spots or uneven resin distribution in the final product. Outside diameter: 12 mm Inside diameter: 9 mm   Intrastat Number for this product: 39239000..
50.00€
  Low density polyethylene pipe for all kinds of thermosetting resins. Suitable for resin distribution in infusion and vacuum bagging processes. Material type: Polyethylene External diameter: 8 mm Internal diameter: 6 mm Pipe thickness: 1 mm Max temp: 90 oC   Intrastat Number for this product: 39173900..
0.40€
  Low density polyethylene pipe for all kinds of thermosetting resins. Suitable for resin distribution in infusion and vacuum bagging processes. Material type: Polyethylene External diameter: 10 mm Internal diameter: 8 mm Pipe thickness: 1 mm Max temp: 90 oC   Intrastat Number for this product: 39173900..
0.52€
Low density polyethylene pipe for all kinds of thermosetting resins. Suitable for resin distribution in infusion and vacuum bagging processes. Material type: Polyethylene External diameter: 12 mm Internal diameter: 10 mm Pipe thickness: 1 mm Max temp: 90 oC   Intrastat Number for this product: 39173900..
0.60€
Low density polyethylene pipe for all kinds of thermosetting resins. Suitable for resin distribution in infusion and vacuum bagging processes. Material type: Polyethylene External diameter: 15 mm Internal diameter: 12 mm Pipe thickness: 1 mm Max temp: 90 oC   Intrastat Number for this product: 39173900..
0.90€
Connection net is used in infusion, in order to modify the flow.   Intrastat Number for this product: 39239000..
0.55€
  Disposable plastic infusion plug with rounded edges to protect vacuum bags from tearing. Suitable for tubes with 12 mm external diameter (usually 10 mm inner diameter). Material type: Polypropylene Maximum use temperature: 120°C (248°F)   Intrastat Number for this product: 39239000..
1.10€
  Disposable plastic infusion plug with rounded edges to protect vacuum bags from tearing. Suitable for tubes with 15 mm external diameter (usually 12,5 mm inner diameter). Material type: Polypropylene Maximum use temperature: 120°C (248°F)   Intrastat Number for this product: 39239000..
1.10€
  Disposable plastic infusion plug with rounded edges to protect vacuum bags from tearing. Suitable for tubes with 16 mm external diameter (usually 13 mm inner diameter). Material type: Polypropylene Maximum use temperature: 120°C (248°F)   Intrastat Number for this product: 39239000..
1.10€
  Disposable plastic infusion plug with rounded edges to protect vacuum bags from tearing. Suitable for tubes with 17 mm external diameter (usually 14 mm inner diameter). Material type: Polypropylene Maximum use temperature: 120°C (248°F)   Intrastat Number for this product: 39239000..
1.10€
  Roll length: 150 lm Roll price: 66.52 EUR / 150 lm roll Price / lm: 0.44 EUR Width: 2.54 cm Thickness: 50 μm Max temp: 205 oC (401 oF) Breaking elongation: 400%   Intrastat Number for this product: 39209959..
66.52€
  Roll length: 200 lm Roll price: 93.14 EUR / 200 lm roll Price / lm: 0.62 EUR   Self-releasing tubular vacuum film, also suitable for the manufacturing of hollow composite structures by blow moulding. The main benefits of this film are high elongation and easy removal after cure, designed to avoid damage to components. Width: 5.08 cm Thickness: 100 μm Max temp: 205 oC (401 oF) Breaking elongation: 400%   Intrastat Number for this product: 39209959..
93.14€
  Roll length: 200 lm Roll price: 110.00 EUR / 200 lm roll Price / lm: 0.55 EUR   Self-releasing tubular vacuum film, also suitable for the manufacturing of hollow composite structures by blow moulding. The main benefits of this film are high elongation and easy removal after cure, designed to avoid damage to components. Width: 6.00 cm Thickness: 100 μm Max temp: 205 oC Breaking elongation: 400%   Intrastat Number for this product: 39209959..
110.00€
  Roll length: 200 lm Roll price: 129.18 EUR / 200 lm roll Price / lm: 0.52 EUR   Self-releasing tubular vacuum film, also suitable for the manufacturing of hollow composite structures by blow moulding. The main benefits of this film are high elongation and easy removal after cure, designed to avoid damage to components. Width: 7.50 cm Thickness: 100 μm Max temp: 205 oC (401 oF) Breaking elongation: 320%   Intrastat Number for this product: 39209959..
129.18€
  Roll length: 200 lm Roll price: 117.78 EUR / 200 lm roll Price / lm: 0.59 EUR Width: 10.16 cm Thickness: 50 μm Max temp: 205 oC (401 oF) Breaking elongation: 320%   Intrastat Number for this product: 39209959..
117.78€
  0.42 EUR / linear meter Thickness: 140 μm Width: 12 cm Max temp: 70 oC (158 oF)   Intrastat Number for this product: 39209959..
0.42€
  0.48 EUR / linear meter Thickness: 140 μm Width: 15 cm Max temp: 70 oC (158 oF)   Intrastat Number for this product: 39209959..
0.48€
  0.60 EUR / linear meter Thickness: 140 μm Width: 23 cm Max temp: 70 oC (158 oF)   Intrastat Number for this product: 39209959..
0.60€
  0.88 EUR / linear meter Thickness: 140 μm Width: 35 cm Max temp: 70 oC / 158 oF   Intrastat Number for this product: 39209959..
0.88€
  Width: 45.72 cm Thickness: 50 μm Max temp: 170 oC (338 oF) Breaking elongation: 360%   Intrastat Number for this product: 39209959..
From 0.63€ ...to 1.55€
  Width: 100 cm Thickness: 70 μm Max temp: 140 oC / 284 oF Tensile strength: >35 Mpa Breaking elongation: 650%   Intrastat Number for this product: 39209959..
From 1.24€ ...to 2.16€
  Width: 120 cm Thickness: 50 μm Max temp: 170 oC (338 oF) Tensile strength: >35 Mpa Breaking elongation: 650%   Intrastat Number for this product: 39209959..
From 1.63€ ...to 2.55€
  Width: 150 cm Thickness: 50 μm Max temp: 170 oC (338 oF) Tensile strength: >35 Mpa Breaking elongation: 650%   Intrastat Number for this product: 39209959..
From 2.03€ ...to 2.95€
  Width: 200 cm Thickness: 70 μm Max temp: 140 oC (284 oF) Tensile strength: >35 Mpa Breaking elongation: 650%   Intrastat Number for this product: 39209959..
From 0.68€ ...to 1.60€
  Width: 240 cm Thickness: 50 μm Max temp: 170 oC (338 oF) Tensile strength: >35 Mpa Breaking elongation: 650%   Intrastat Number for this product: 39209959..
From 0.68€ ...to 1.60€
  Modified nylon Widths: 4 m, 6 m, 8 m and 10 m Thickness: 75 μm Max temp: 120 oC (248 oF) Breaking elongation: 600%   Intrastat Number for this product: 39209959..
From 0.68€ ...to 1.60€
  Designed for vacuum bagging operations, mastic sealant tapes are used for both "bag to tool" and "bag to bag" applications. They exhibit strong tack, ensuring an air-tight seal throughout the curing cycle. They facilitate easy removal, leaving a clean, residue-free surface, and require minimum cleanup between the cycles.   Technical characteristics: Roll length: 21 meters Max temp: 210 oC (410 oF) Width: 6 mm (0.6 cm) Thickness: 2 mm (0.2 cm)   Features & Benefits: Oven and autoclave compatible Residue-free tool release Adheres in low temperatures Versatile applications Non-hazardous   Intrastat Number for this product: 40059100  ..
From 4.55€ ...to 6.05€
  Designed for vacuum bagging operations, mastic sealant tapes are used for both "bag to tool" and "bag to bag" applications. They exhibit strong tack, ensuring an air-tight seal throughout the curing cycle. They facilitate easy removal, leaving a clean, residue-free surface, and require minimum cleanup between the cycles.   Technical characteristics: Roll length: 15 meters Max temp: 210 oC (410 oF) Width: 10 mm (1.0 cm) Thickness: 3 mm (0.3 cm)   Features & Benefits: Oven and autoclave compatible Residue-free tool release Adheres in low temperatures Versatile applications Non-hazardous   Intrastat Number for this product: 40059100..
From 7.00€ ...to 8.55€
  Heat shrink tape for manufacturing prepreg wrapped tubes. High shrink and compaction force, release coated both sides. Can withstand temperatures up to 140 - 150 oC. Suitable for in or out of autoclave curing. Also suitable for room temperature, heat gun (self-made prepreg) application. Specialized widths of tapes, different diameters of inner carton core and different grades of shrink films are offered upon request. Technical characteristics: Width: 25 mm Density: 91 g/m3, 27 g/m2 1100 lm: 0.75 kg Thickness: 30 micron (for reduced step) Inner diameter of core papertube: 70 mm Outer diameter of reel: 250 mm   Intrastat Number for this product: 39209959..
21.10€
  High temperature, pressure sensitive PET (polyester) tape with a silicone adhesive. It can be used to provide an instant, temporary release surface on any material, to hold down vacuum bagging consumables in position, join temporary barriers and also tape flash lines on moulds. It is versatile, easy to remove, tear resistant, has a flat, shiny surface and does not deform in high heat (zero curling and shrinkage). Easily separable from the epoxy, it leaves a clean finish with no residue or damage to the applied surface when removing it. Technical characteristics: Material type: PET (polyester) Roll length: 66 meters Width: 25 mm Thickness: 61 μm Long term working temperature: 120°C (248°F) Maximum short term working temperature: 228°C (442°F) Suitable for multiple applications: Vacuum bagging Resin infusion Pre-preg processes Oven/autoclave curing Epoxy and polyester surface Woodworking and resin casting Various art applications   Intrastat Number for this product: 3919908065..
9.10€
  High temperature, pressure sensitive PET (polyester) tape with a silicone adhesive. It can be used to provide an instant, temporary release surface on any material, to hold down vacuum bagging consumables in position, join temporary barriers and also tape flash lines on moulds. It is versatile, easy to remove, tear resistant, has a flat, shiny surface and does not deform in high heat (zero curling and shrinkage). Easily separable from the epoxy, it leaves a clean finish with no residue or damage to the applied surface when removing it. Technical characteristics: Material type: PET (polyester) Roll length: 66 meters Width: 50 mm Thickness: 61 μm Long term working temperature: 120°C (248°F) Maximum short term working temperature: 228°C (442°F) Suitable for multiple applications: Vacuum bagging Resin infusion Pre-preg processes Oven/autoclave curing Epoxy and polyester surface Woodworking and resin casting Various art applications   Intrastat Number for this product: 3919908065..
18.00€
  Width: 1.30 meters Thickness: 70 μ Embossing film, with heavier imprinted texture, used to facilitate the impregnation of prepregs, usually with SR8500 / KTA311 (but also other, colder curing) epoxy systems. It is texturized in such a way so to facilitate air to escape, or drive air out of the impregnating laminate. It is also used as a protective liner that separates prepreg layers.   Intrastat Number for this product: 39206212..
1.56€
Width: 1.30 meters Thickness: 50 μ Embossing film, with lighter imprinted texture, used to facilitate the impregnation of prepregs, usually with SR8500 / KTA311 (but also other, colder curing) epoxy systems. It is texturized in such a way so to facilitate air to escape, or drive air out of the impregnating laminate. It is also used as a protective liner that separates prepreg layers.   Intrastat Number for this product: 39206212..
1.12€
  Container of 600 ml   Multipurpose strong adhesive spray. Suitable for fixing reinforcement fabrics, carbon, fiberglass, aramid, foam, plastic, and light materials. Ideal for securing heavy fabrics during the cutting phase. It is repositionable and suitable for cosmetic finish (not visible on the finished parts if moderate amount is used.) Transluscent and rapid-drying, recommended for both temporary and permanent bonds.   USAGE For temporary bonding: Spray a thin film from a distance of 30 cm onto fabric or the support, wait for a few seconds, and then apply the material to be fixed. For permanent bonding: Spray a thin film from a distance of 20 cm onto the material or the support, wait for a few seconds, and then join the material to be fixed. For stronger bonding, spray on both sides/parts to be fixed.   Intrastat Number for this product: 35069900..
From 7.38€ ...to 8.20€
  Immobilizes fabrics on molds before impregnation, mostly for infusion. It can be used for hand-layup where unhandy angles make impregnation very difficult. Dry fabrics sprayed, become self adhesive.   Container of 0.5 lt Net weight: 0.35 g Conversion data: 1 kg = 2.2 lbs = 35.3 oz, 1 lt = 0.91 qt = 20 fl oz   Intrastat Number for this product: 35069900..
From 14.67€ ...to 16.30€
  SPRAY ADHESIVE MADE BY EPOXY RESIN Securely bonds most lightweight composite materials e.g. reinforcement fabrics, resin films and prepregs, polystyrene and PVC foam. It exhibits light color, that is unobtrusive and non staining on the final product. It can be used for permanent or temporary bonds and high temperature / prepreg curing.   Container of 0.6 lt Conversion data: 1 kg = 2.2 lbs = 35.3 oz, 1 lt = 0.91 qt = 20 fl oz   Intrastat Number for this product: 35069900..
From 29.80€ ...to 33.12€
Showing 1 to 55 of 55 (1 Pages)