Impregnation

epoxy system sicomin sr1700 sd2806, epoxy resin for impregnation, epoxy resin for laminating (Set of 2 components resin + hardener)   High performance epoxy laminating system SR1700/SD2806 with fast hardener   Each kilo includes 0.72 kg resin + 0.28 kg hardener   High modulus, very stiff system, with low water absorption when cured and excellent adhesion to all types of reinforcements (carbon, aramid, glass etc). This system was developed for automotive, naval, and aerospace applications.   The 2806 and 2803 hardeners can be mixed in any proportion to achieve the required reactivity. The fast hardener 2806 offers fast laminate hardening at ambient temperature from 10 to 40 oC ( 50 to 104 oF) and can be slowed down by 2803. Good mechanical properties are achieved after room temperature curing, awesome after post curing.   Fast hardener SD2806 Fast reactivity, short working time, for laminating thin composites. Awesome mechanical properties, parts can be released after 24 hours at 18 oC / 64.4 oF. Mechanical properties are optimized by post-curing at 50-55 oC / 122-131 oF. Designed for the manufacturing of high performance composites, with a service temperature up to 70-80 oC / 158-176 oF.   PROPERTIES Physical properties of SR1700 epoxy resin Aspect / colour: Yellowish liquid Viscosity (mPa.s) at 20 oC / 68 oF: 1950 Density at 20 oC / 68 oF: 1.16   Physical properties of SD2806 hardener Aspect / colour: Yellowish liquid Viscosity (mPa.s) at 20 oC / 68 oF: 300 ± 60 Density (g/cm3) at 20 oC / 68 oF: 1.07 ± 0.01   Mix properties of SR1700 / SD2806 system Weight ratio: 100 / 39 g Volume ratio: 100 / 43 ml Mix viscosity at 20 oC / 68 oF: 940   Reactivity of SR1700 / SD2806 system Pot life on 500 g mix at 20 oC/ 68 oF: 27' Exothermic peak on 500 g mix at 20 oC/ 68 oF: > 210 oC / 410 oF Time to reach exothermic peak at 20 oC / 68 oF: 23'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr1700 sd2803, epoxy resin for impregnation, epoxy resin for laminating (Set of 2 components resin + hardener)   High performance epoxy laminating system SR1700 / SD2803 with medium hardener   Each kilo includes 0.72 kg resin + 0.28 kg hardener   High modulus, very stiff system, with low water absorption when cured and excellent adhesion to all types of reinforcements (carbon, aramid, glass etc). This system was developed for automotive, naval, and aerospace applications.   The 2803 and 2806 hardeners can be mixed in any proportion to achieve the required reactivity. The fast hardener 2806 offers fast laminate hardening at ambient temperature from 10 to 40 oC(50 to 104 oF) and can be slowed down by 2803. Good mechanical properties are achieved after room temperature curing, awesome after post curing.   Medium hardener SD2803: Slow reactivity, long working time, for laminating medium thickness composites. Good mechanical properties, parts can be released after 24 hours at 18 oC/64 oF. Mechanical properties are optimized by post-curing at 50-55 oC/ 122-131 oF. Designed for the manufacturing of high performance composites, with a service temperature up to 60-70 oC/ 140-158 oF. PROPERTIES Physical properties of SR1700 epoxy resin: Aspect / colour: Yellowish liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 1950 (+- 200) Density at 20 oC/ 68 oF: 1.16 (+-0.01) Physical properties of SD2803 hardener: Aspect / colour: Yellowish liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 140 (+-30) Density (g/cm3) at 20 oC/ 68 oF: 1.00 (+-0.01) Mix properties of SR1700 / SD2803 system: Weight ratio: 100 / 39 g Volume ratio: 100 / 45 ml Mix viscosity at 20 oC/ 68 oF: 700 (+-100) Reactivity of SR1700 / SD2803 system: Pot life on 500 g mix at 20 oC/ 68 oF: 2 h 10' Exothermic peak on 500 g mix at 20 oC/ 68 oF: 200 oC/ 392 oF Time to reach exothermic peak at 20 oC/ 68 oF: 1 h 58'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr1700 sd7820, epoxy resin for impregnation, epoxy resin for laminating, epoxy resin for tooling (Set of 2 components resin + hardener)   High performance epoxy laminating system SR1700 / SD7820 with slow hardener   Each kilo includes 0.74 kg resin + 0.26 kg hardener   High modulus, very stiff system, with low water absorption when cured and excellent adhesion to all types of reinforcements (carbon, aramid, glass etc). This system was developed for automotive, naval, and aerospace applications.   Slow hardener SD7820: Slow hardener, very low viscosity allowing fast reinforcements to wet out. Laminates require 6 to 8 hours of working time. It is adapted to the production of parts with a service temperature up to 120°C/ 248 oF. Items can be handled and extracted from moulds after 12 hours at 40°C/ 104 oF or 8 h at 60°C/ 140 oF. PROPERTIES Physical properties of SR1700 epoxy resin: Aspect / colour: Yellow liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 1950 (+- 200) Density at 20 oC/ 68 oF: 1.16 (+-0.01) Physical properties of SD7820 hardener: Aspect / colour: Clear liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 80 ± 15 Density (g/cm3) at 20 oC/ 68 oF: 0.96 ± 0.01 Mix properties of SR1700 / SD7820 system: Weight ratio: 100 / 36 g Volume ratio: 100 / 43 ml Mix viscosity at 20 oC/ 68 oF: 750 ± 150 Reactivity of SR1700 / SD7820 system: Exothermic peak on 500 g mix at 20 oC/ 68 oF: 140 oC/ 284 oF Time to reach exothermic peak at 20 oC/ 68 oF: 9 h 30' Pot life on 500 g mix at 20 oC/ 68 oF: 8 h 45'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr8200 sd7203, epoxy resin for impregnation, epoxy resin for laminating (Set of 2 components resin + hardener)   Laminating epoxy system SR8200 / SD7403 with medium hardener Each kilo includes 0.73 kg resin + 0.27 kg hardener The SR8200 / SD7403 system exhibits very good mechanical properties, high elongation, fatigue resistance, low odor during application and relatively low cost. The maximum temperature resistance is at least 90 oC/ 194 oF; however, some post curing is required in order to have service temperature of 60 - 70 oC/ 140 - 158 oF. Typical applications include bows, masts and long service bending products. Medium hardener SD7403: Offers fast hardening of laminates at ambient temperature for hand laminating, press or vacuum. Good mechanical properties at ambient temperature, excellent after post cure. PROPERTIES Physical properties of SR8200 epoxy resin: Aspect / colour: Yellowish liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 2900 ± 600 Density at 20 oC/ 68 oF: 1.175 ± 0.01 Physical properties of SD7403 hardener: Aspect / colour: Yellowish liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 120 ± 25 Density at 20 oC/ 68 oF: 1.01 ± 0.01 Mix properties of SR8200 / SD7403 system: Weight ratio: 100 / 37 g Volume ratio: 100 / 43 ml Mix viscosity at 20 oC/ 68 oF: 1050 ± 200 Reactivity of SR8200 / SD7403 system: Pot life for 100 g mix at 25 oC/ 77 oF: 2 h 33' Exothermic temperature for 100 g mix at 20 oC/ 68 oF: 40 oC/ 104 oF Time to reach exothermic peak for 100 g mix at 20 oC/ 68 oF: 4 h 26'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr8200 sd7401, epoxy resin for impregnation, epoxy resin for laminating (Set of 2 components resin + hardener)   Laminating epoxy system SR8200 / SD7401 with slow hardener Each kilo includes 0.73 kg resin + 0.27 kg hardener The SR8200 / SD7401 system exhibits very good mechanical properties, high elongation, fatigue resistance, low odor during application and relatively low cost. The maximum temperature resistance is at least 90 oC/ 194 oF; however, some post curing is required in order to have service temperature of 60 - 70 oC/ 140 - 158 oF. Typical applications include bows, masts and long service bending products. Slow hardener SD7401: Reactivity formulated for hand laminating, under press or medium to large parts under vacuum. Requires a post-cure at 55 °C to 60 °C. Designed for manufacturing of high performance composites and tooling with service temperature of 60°C to 70°C/ 140 to 158 oF. PROPERTIES Physical properties of SR8200 epoxy resin: Aspect / colour: Yellowish liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 2900 ± 600 Density at 20 oC/ 68 oF: 1.175 ± 0.01 Physical properties of SD7401 hardener: Aspect / colour: Clear to yellow liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 60 ± 15 Density at 20 oC/ 68 oF: 0.95 ± 0.01 Mix properties of SR8200 / SD7401 system: Weight ratio: 100 / 37 g Volume ratio: 100 / 46 ml Mix viscosity at 20 oC/ 68 oF: 790 ±150 Reactivity of SR8200 / SD7401 system: Pot life for 100 g mix at 30 oC/ 86 oF: 2 h 56' Exothermic temperature for 100 g mix at 20 oC/ 68 oF: 25 oC/ 77 oF Time to reach exothermic peak for 100 g mix at 20 oC/ 68 oF: 8 h    Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr8200 sd4775, epoxy resin for impregnation, epoxy resin for laminating (Set of 2 components resin + hardener)   Versatile epoxy system SR8200 / SD4775 with medium hardener Each kilo includes 0.78 kg resin + 0.22 kg hardener Applications: - Hand laminating - Infusion - Adhesive - Tooling - Casting - Laminate PROPERTIES Physical properties of SR8200 epoxy resin: Aspect / colour: Viscous liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 2900 ± 600 Density at 20 oC/ 68 oF: 1.175 ± 0.005 Physical properties of SD4775 hardener: Aspect / colour: Clear liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 190 ± 40 Density at 20 oC/ 68 oF: 1.010 ± 0.005 Mix properties of SR8200 / SD4775 system: Weight ratio: 100 / 28 g Volume ratio: 100 / 33 ml Mix viscosity at 20 oC/ 68 oF: 1000 ± 200 Reactivity of SR8200 / SD4775 system: Exothermic temperature for 500 g mix at 20 oC/ 68 oF: 262 oC/ 504 oF Time to reach exothermic peak for 500 g mix at 20 oC/ 68 oF: 55' Pot life of 500 g mix at 20 oC/ 68 oF: 39'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr8500 sd8605, epoxy resin for impregnation, epoxy resin for laminating (Set of 2 components resin + hardener)   Versatile epoxy system SR8500 / SD8605 for composite applications with fast hardener Each kilo includes 0.74 kg resin + 0.26 kg hardener The SR8500 / SD8605 system allows manufacturing of multiple kinds of composite parts that can work up to 70 oC continuously. Solvent and reactive diluent free, without any aromatic or CMR amines and very simple handling: One resin and two hardeners mixable in any proportions to achieve the desired reactivity. Curing at ambient temperature and post curing at 40 to 60 oC/ 104 to 140 oF.       Germanischer Llyod's certified Fast hardener SD8605: Can be used as an accelerator for hardener SD8601. Reactivity adapted for the manufacturing of small parts. Good mechanical properties after ambient curing. Applications: Hand laminating Injection Filament winding Cold or Hot press moulding Casting Adhesive PROPERTIES Physical properties of SR8500 epoxy resin: Aspect / colour: Clear liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 9 800 ± 1 000 Density at 20 oC/ 68 oF: 1.176 ± 0.05 Physical properties of SD8605 hardener: Aspect / colour: Yellowish liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 400 ± 80 Density at 20 oC/ 68 oF: 1.02 ± 0.01 Mix properties of SR8500 / SD8605 system: Weight ratio: 100 / 35 Volume ratio: 100 / 40 Mix viscosity at 20 oC/ 68 oF: 2800 (+-450) Reactivity of SR8500 / SD8605 system: Pot life on 500 g mix at 20 oC/ 68 oF: 31'/ 68 oF Exothermic peak on 500 g mix at 20 oC/ 68 oF: 237 oC/ 459 oF Time to reach exothermic peak on 500 g mix at 20 oC/ 68 oF: 39'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr8500 sd8601, epoxy resin for impregnation, epoxy resin for laminating (Set of 2 components resin + hardener)   Versatile epoxy system SR8500 / SD8601 for composite applications with slow hardener Each kilo includes 0.74 kg resin + 0.26 kg hardener The SR8500 / SD8601 system allows manufacturing of multiple kinds of composite parts that can work up to 70 oC/ 158 oF continuously. Solvent and reactive diluent free, without any aromatic or CMR amines and very simple handling: One resin and two hardeners mixable in any proportions to achieve the desired reactivity. Curing at ambient temperature and post curing at 40 to 60 oC/ 104 to 140 oF.       Germanischer Llyod's certified Slow hardener SD8601: Reactivity adapted for manufacturing of large parts. Should be post cured at 40 oC/ 104 oF before demoulding. Applications: Hand laminating Injection Filament winding Cold or Hot press moulding Casting Adhesive PROPERTIES Physical properties of SR8500 epoxy resin: Aspect / colour: Clear liquid Viscosity (mPa.s) at 20 oC/ 68 oF : 9800 (+-1000) Density at 20 oC/ 68 oF: 1.176 (+-0.05) Physical properties of SD8601 hardener: Aspect / colour: Clear liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 15 (+-3) Density at 20 oC/ 68 oF: 0.950 (+-0.01) Mix properties of SR8500 / SD8601 system: Weight ratio: 100 / 35 Volume ratio: 100 / 43 Mix viscosity at 20 oC/ 68 oF: 750 (+-150) Reactivity of SR8500 / SD8601 system: Pot life on 500 g mix at 25 oC: 7 h 25' Exothermic peak on 500 g mix 20 oC/ 68 oF: 33 oC/ 91 oF Time to reach exothermic peak on 500 g mix at 20 oC/ 68 oF: 15 h 10'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr1710 sd8824, epoxy resin for impregnation, epoxy resin for infusion rtm (Set of 2 components resin + hardener)   Structural epoxy system SR1710 / SD8824 for vacuum infusion and RTM with fast hardener Each kilo includes 0.81 kg resin + 0.19 kg hardener Two component epoxy system, specially designed for Resin Transfer Molding process, vacuum infusion, injection, etc. It may also be used in hand layup (for flat surface molds or molds with no vertical surfaces). It exhibits very high mechanical properties, especially interlaminar shear strength. This system has a very low viscosity, and low reactivity for manufacturing of large parts. It also exhibits excellent retention of the mechanical characteristics in a wet environment. Temperature resistance: Tg1 max = 100 oC/ 212 oF       Germanischer Llyod's certified PROPERTIES Physical properties of SR1710 epoxy resin: Aspect / colour: Yellowish liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 1550 ± 350 Density (g/cm3) at 20 oC/ 68 oF: 1.1500 Physical properties of SD8824 hardener: Aspect / colour: Light yellowish liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 6 (+- 2) Density (g/cm3) at 20 oC/ 68 oF: 0.944 Mix properties of SR1710 / SD8824 system: Mix viscosity (mPa.s) at 20 oC/ 68 oF: 290 (+-30) Mixing ratio by weight: 100 g / 23 g Mixing ratio by volume: 100 ml / 28 ml Reactivity of SR1710 / SD8824 system: Pot life on 500 g mix at 20 oC/ 68 oF: 2 h 30' Exothermic temperature on 500 g mix at 20 oC/ 68 oF: 215 oC/ 419 oF Time to reach the exothermic peak on 500 g mix at 20 oC/ 68 oF: 2 h 40' Polymerisation of SD8824 hardener: Time to wait at 20 oC/ 68 oF before post-curing*: 6 hours Minimum post-cure cycle: 24 hours at 40 oC/ 104 oF Advised post-cure cycle: 8 hours at 60 oC/ 140 oF *has to be respected in case of thick laminate (> 3 mm,) so to limit the risk of exothermic reaction.   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr8100 sd8824, epoxy resin for impregnation, epoxy resin for infusion rtm (Set of 2 components resin + hardener)   Epoxy system SR8100 / SD8824 for injection and infusion with fast hardener Each kilo includes 0.82 kg resin + 0.18 kg hardener The SR8100 is a 2 component epoxy system specially formulated for resin transfer processes, such as injection and infusion. This system has a very low viscosity at ambient temperature. The two different hardeners (SD8822 and SD8824) allow moulding of small to large parts, with fast demoulding times, high mechanical properties and good price. The cured system gives a temperature resistance up to 80 oC/ 176 oF (Tg 1).       Germanischer Llyod's certified            Lloyd's Register certified PROPERTIES Physical properties of SR8100 epoxy resin: Aspect / colour: Yellowish liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 1250 ± 250 Density (g/cm3) at 20 oC/ 68 oF: 1.158 Physical properties of SD8824 hardener: Aspect / colour: Light yellowish liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 6 (+-2) Density (g/cm3) at 20 oC/ 68 oF: 0.944 Physical properties of SD8822 - SD8824 hardeners mix (50/50 by weight): Aspect / colour: Light yellowish liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 9 (+-3) Density (g/cm3) at 20 oC/ 68 oF: 0.942 (+-0.01) Mix properties of SR8100 / SD8824 system: Mix viscosity (mPa.s) at 20 oC/ 68 oF: 300 Mixing ratio by weight: 100 g / 22 g Mixing ratio by volume: 100 ml / 27 ml Mix properties of SR8100 / SD8822-SD8824 (50/50 by weight) system: Mix viscosity (mPa.s) at 20 oC/ 68 oF: 340 (+-100) Mixing ratio by weight: 100 g / 26 g Mixing ratio by volume: 100 ml / 32 ml Reactivity of SR8100 / SD8824 system: Pot life on 500 g mix at 20 oC/ 68 oF: 1 h 21' Exothermic temperature on 500 g mix at 20 oC/ 68 oF: 210 oC/ 410 oF Time to reach the exothermic peak on 500 g mix at 20 oC/ 68 oF: 1 h 27' Reactivity of SR8100 / SD8822-SD8824 (50/50 by weight) system: Pot life on 500 g mix at 20 oC/ 68 oF: 1 h 55' Exothermic temperature on 500 g mix at 20 oC/ 68 oF: >210oC/ 410 oF Time to reach the exothermic peak on 500 g mix at 20 oC/ 68 oF: 2 h 05' Polymerisation of SD8824 hardener under temperature: Gel time on resin film at 40 oC/ 104 oF: 1 h 07' Gel time on resin film at 60 oC/ 140 oF: 26' Gel time on resin film at 80 oC/ 176 oF: 10'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr8100 sd8822, epoxy resin for impregnation, epoxy resin for infusion rtm (Set of 2 components resin + hardener)   Epoxy system SR8100 / SD8822 for injection and infusion with slow hardener Each kilo includes 0.76 kg resin + 0.24 kg hardener The SR8100 is a 2 component epoxy system specially formulated for resin transfer processes, such as injection and infusion. This system has a very low viscosity at ambient temperature. The two different hardeners (SD8822 and SD8824) allow moulding of small to large parts, with fast demoulding times, high mechanical properties and good price. The cured system gives a temperature resistance up to 80 oC/ 176 oF (Tg 1).       Germanischer Llyod's certified            Lloyd's Register certified PROPERTIES Physical properties of SR8100 epoxy resin: Aspect / colour: Yellowish liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 1320 (+-100) Density (g/cm3) at 20 oC/ 68 oF: 1.158 Physical properties of SD8822 hardener: Aspect / colour: Light yellowish liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 20 (+-4) Density (g/cm3) at 20 oC/ 68 oF: 0.937 Physical properties of SD8822-SD8824 hardeners mix (50/50 by weight): Aspect / colour: Light yellowish liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 9 (+-3) Density (g/cm3) at 20 oC/ 68 oF: 0.942 (+-0.01) Mix properties of SR8100 / SD8822 system: Mix viscosity (mPa.s) at 20 oC/ 68 oF: 390 (+-100) Mixing ratio by weight: 100 g / 31 g Mixing ratio by volume: 100 ml / 39 ml Mix properties of SR8100 / SD8822-SD8824 (50/50 by weight) system: Mix viscosity (mPa.s) at 20 oC/ 68 oF: 340 (+-100) Mixing ratio by weight: 100 g / 26 g Mixing ratio by volume: 100 ml / 32 ml Reactivity of SR8100 / SD8822 system: Pot life on 500 g mix at 20 oC/ 68 oF: 3 h 08' Exothermic temperature on 500 g mix at 20 oC/ 68 oF: 205 oC/ 401 oF Time to reach the exothermic peak on 500 g mix at 20 oC/ 68 oF: 3 h 30' Reactivity of SR8100 / SD8822-SD8824 (50/50 by weight) system: Pot life on 500 g mix at 20 oC/ 68 oF: 1 h 55' Exothermic temperature on 500 g mix at 20 oC/ 68 oF: >210oC/ 410 oF Time to reach the exothermic peak on 500 g mix at 20 oC/ 68 oF: 2 h 05' Polymerisation of SD8822 hardener under temperature: Gel time on resin film at 40 oC/ 104 oF: 2 h 33' Gel time on resin film at 60 oC/ 140 oF: 56' Gel time on resin film at 80 oC/ 176 oF: 23'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr8100 sd4771, epoxy resin for impregnation, epoxy resin for infusion rtm (Set of 2 components resin + hardener)   Epoxy system SR8100 / SD4771 for injection and infusion with ultra slow hardener Each kilo includes 0.78 kg resin + 0.22 kg hardener The SR8100 is a 2 component epoxy system specially formulated for resin transfer processes, such as injection and infusion. This system has a very low viscosity at ambient temperature. The different hardeners allow moulding of small to large parts, with fast demoulding times, high mechanical properties and good price. The cured system gives a temperature resistance up to 80 oC/ 176 oF (Tg 1). The hardener SD4771 is designed for very thick fibers laminates. PROPERTIES Physical properties of SR8100 epoxy resin: Aspect / colour: Yellow liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 1320 (+-260) Density (g/cm3) at 20 oC/ 68 oF: 1.158 Physical properties of SD4771 hardener: Aspect / colour: Light yellow liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 11 (+-2) Density (g/cm3) at 20 oC/ 68 oF: 0.944 Mix properties of SR8100 / SD4771 system: Mix viscosity (mPa.s) at 20 oC/ 68 oF: 400 Mixing ratio by weight: 100 / 29 g Mixing ratio by volume: 100 ml / 36 ml Reactivity of SR8100 / SD4771 system: Exothermic temperature on 500 g mix at 20 oC/ 68 oF: 200 oC/ 392 oF  Time to reach the exothermic peak on 500 g mix at 20 oC/ 68 oF: 5 h 15' Time to reach 50 oC/ 68 o on 500 g mix at 20 oC/ 68 oF: 4 h 40'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr greenpoxy 56 sd7561, epoxy resin for impregnation, bio based epoxy resin (Set of 2 components resin + hardener)   Bio based versatile epoxy system SR GreenPoxy 56 / SD7561 with slow hardener Each kilo includes 0.74 kg resin + 0.26 kg hardener SR GreenPoxy 56 resin is based on the latest innovations in green chemistry and represents a significant technological breakthrough on the following points: purity, color, performance and guarantees on the availability of industrial tonnages. Its molecular structure is bio-based at almost 51% and is produced with a high carbon content of plant origin.   Applications: - Contact laminating (mold or industrial part) - Injection - Filament winding - Hot or cold press - Little casting PROPERTIES Physical properties of SR GreenPoxy 56 epoxy resin: Aspect / colour: Liquid colourless Viscosity (mPa.s) at 20 oC/ 68 oF: 1600 ± 300 Density (g/cm3) at 20 oC/ 68 oF: 1.1980 Physical properties of SD7561 hardener: Aspect / colour: Liquid colourless Viscosity (mPa.s) at 20 oC/ 68 oF: 60 ± 15 Density (g/cm3) at 20 oC/ 68 oF: 0.9710 Mix properties of SR GreenPoxy 56 / SD7561 system: Mix viscosity (mPa.s) at 20 oC/ 68 oF: 700 Mixing ratio by weight: 100 g / 36 g Mixing ratio by volume: 100 ml / 45 ml   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr greenpoxy 56 sz8525, epoxy resin for impregnation, epoxy resin for hot process, bio based epoxy resin (Set of 2 components resin + hardener)   Clear bio based epoxy system SR GreenPoxy 56 / SZ8525 for hot process Each kilo includes 0.80 kg resin + 0.20 kg hardener SR GreenPoxy 56 resin is based on the latest innovations in green chemistry and represents a significant technological breakthrough on the following points: purity, color, performance and guarantees on the availability of industrial tonnages. Its molecular structure is bio-based at almost 51% and is produced with a high carbon content of plant origin.   The SR GreenPoxy 56 / SZ8525 epoxy system exhibits high mechanical and good wetting out properties resulting in a low resin consumption and a clear laminate and final aspect. The recommended cycle of 10 min is at 100°C/ 212 oF and the mix bio-based carbon content of about 45%. PROPERTIES Physical properties of SR GreenPoxy 56 epoxy resin: Aspect / colour: Liquid colourless Viscosity (mPa.s) at 20 oC/ 68 oF: 1400 Density (g/cm3) at 20 oC/ 68 oF: 1,1980 Physical properties of SZ8525 hardener: Aspect / colour: Light yellow liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 33 Density (g/cm3) at 20 oC/ 68 oF: 0.94 ± 0.01 Mix properties of SR GreenPoxy 56 / SZ8525 system: Mix viscosity (mPa.s) at 20 oC/ 68 oF: 1160 Mixing ratio by weight: 100 g / 25 g Mixing ratio by volume: 100 ml / 32 ml   Reactivity of SR GreenPoxy 56 / SZ8525 system: Exothermic peak on 500 g mix at 20 oC/ 68 oF: 280oC/ 536 oF Time to reach exothermic peak on 500 g mix at 20 oC/ 68 oF: 27' Time to reach 50 °C/ 122 oF on 500 g mix at 20 oC/ 68 oF: 19'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

  (Set of 2 components resin + hardener)   Marine and wood epoxy system SR GreenPoxy 550 / SD555 with fast hardener Each kilo includes 0.70 kg resin + 0.30 kg hardener SR GreenPoxy 550 / SD555 epoxy system is designed for shipbuilding, specifically for bonding, lamination, fillet joints, and wood coating. The wide reactivity range provided by its hardeners allows for adjusting the working time according to application conditions. It is specifically designed to provide enhanced resistance to challenging application conditions, such as low temperature or high humidity.   SR GreenPoxy 550 / SD555 epoxy system can achieve a total of 32% biobased carbons. PROPERTIES Physical properties of SR GreenPoxy 550 epoxy resin: Aspect / colour: Cloudy liquid Viscosity (m.Pas) at 20 oC/ 68 oF: 3100 Density (g/cm3) at 20 oC/ 68 oF: 1.16 Physical properties of SD555 hardener: Aspect / colour: Orange liquid Viscosity (m.Pas) at 20 oC/ 68 oF: 330 Density (g/cm3) at 20 oC/ 68 oF: 1.01 Mix properties of SR GreenPoxy 550 / SD555 system: Viscosity of the mix (m.Pas) at 20 oC/ 68 oF: 1350 Weight ratio: 100 / 42 g Volume ratio: 2 / 1 Reactivity of SR GreenPoxy 550 / SD555 system: Pot life for 100 g mix at 20 oC/ 68 oF: 20-25' Maximum temperature for 100 g mix at 20 oC/ 68 oF: 160 oC/ 320 oF Time to reach the exothermic temperature for 100 g mix at 20 oC/ 68 oF: 30' Gel time at 20 oC/ 68 oF: 4h 40'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

  (Set of 2 components resin + hardener)   Marine and wood epoxy system SR GreenPoxy 550 / SD551 with slow hardener Each kilo includes 0.70 kg resin + 0.30 kg hardener SR GreenPoxy 550 / SD551 epoxy system is designed for shipbuilding, specifically for bonding, lamination, fillet joints, and wood coating. The wide reactivity range provided by its hardeners allows for adjusting the working time according to application conditions. It is specifically designed to provide enhanced resistance to challenging application conditions, such as low temperature or high humidity.   SR GreenPoxy 550 / SD551 epoxy system can achieve a total of 32% biobased carbons. PROPERTIES Physical properties of SR GreenPoxy 550 epoxy resin: Aspect / colour: Cloudy liquid Viscosity (m.Pas) at 20 oC/ 68 oF: 3100 Density (g/cm3) at 20 oC/ 68 oF: 1.16 Physical properties of SD551 hardener: Aspect / colour: Orange liquid Viscosity (m.Pas) at 20 oC/ 68 oF: 130 Density (g/cm3) at 20 oC/ 68 oF: 0.98 Mix properties of SR GreenPoxy 550 / SD551 system: Viscosity of the mix (m.Pas) at 20 oC/ 68 oF: 690 Weight ratio: 100 / 42 g Volume ratio: 2 / 1 Reactivity of SR GreenPoxy 550 / SD551 system: Pot life for 100 g mix at 20 oC/ 68 oF: 1 h 30'-1h 45' Maximum temperature for 100 g mix at 20 oC/ 68 oF: 160 oC/ 320 oF Time to reach the exothermic temperature for 100 g mix at 20 oC/ 68 oF: 2h Gel time at 20 oC/ 68 oF: 12h 40'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr surf clear sd evo, epoxy resin for surf boards, epoxy resin for finishing, clear epoxy resin, uv resistant epoxy resin, bio based epoxy resin (Set of 2 components resin + hardener)   Epoxy system SR Surf Clear EVO / SD EVO with fast hardener for translucent laminates Each kilo includes 0.71 kg resin + 0.29 kg hardener Surf Clear epoxy system is specially formulated for the manufacturing of wind-surf boards and surf boards. It is adapted for hand lay up of carbon, aramid, glass and HMP fabrics and is compatible with all core materials and foams. SR Surf Clear EVO resin characteristics: - Very tough epoxy resin with high thermo-mechanical performance. Recommended for high performance wave and slalom wind surf boards and sandwich (or not sandwich for wave riding surf) construction. - Creates ultra light composite parts with high mechanical resistance and UV stability. - For surface preparation / plug finishing, high-gloss requirements. - Other applications: Jewellery, coating of coloured patterns, prototypes.   Surf Clear EVO epoxy resin is manufactured with a bio-based carbon content of about 40%.   System characteristics: - Very good UV stability - Hardening without tack - High gloss - Low viscosity - Transparency of laminates - Self leveling - Scratch resistance Instructions for application: Work in a clean environment with heating facility. Working temperature: 20 oC/ 68 oF minimum, 35-40 oC/ 95-104 oF maximum. Maintain a constant temperature during lamination. Avoid high ambient humidity (< 70%). Avoid exposure to UV during cure. Laminates and coatings have a polymerization cycle of 14 days at 25 oC/ 77 oF. Post curing offers greater UV resistance. Do not wet sand laminates or coatings before 4 days at 25 oC/ 77 oF. Do not dilute with acetone, ester or alcohol based solvents. Keep packaging well sealed as hardener is sensitive to carbonic gas and humidity. A polyurethane paint finish can be applied without primer after sanding the final layer of resin. PROPERTIES Physical properties of SR Surf Clear EVO epoxy resin: Appearance / colour: Light purple liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 2925 ± 575 Density (g/cm3) at 20 oC/ 68 oF: 1,1817 Physical properties of SD EVO Fast hardener: Appearance / colour: Water clear liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 190 ± 40 Density (g/cm3) at 20 oC/ 68 oF: 1.000 Mix properties of SR Surf Clear EVO / SD EVO Fast system: Mix viscosities (mPa.s) at 20 oC/ 68 oF: 2000 Mixing ratio by weight: 100 g / 41 g Mixing ratio by volume: 100 ml / 50 ml (2 / 1) Reactivity of SR Surf Clear EVO / SD EVO Fast system: Exothermic temperature 150 g mix at 20 oC/ 68 oF: 225 oC/ 437 oF Exothermic peak time of 150 g mix at 20 oC/ 68 oF: 15' Pot life of 150 g mix at 20 oC/ 68 oF: 8'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr surf clear sd evo, epoxy resin for surf boards, epoxy resin for finishing, clear epoxy resin, uv resistant epoxy resin, bio based epoxy resin (Set of 2 components resin + hardener)   Epoxy system SR Surf Clear EVO / SD EVO with medium hardener for translucent laminates Each kilo includes 0.72 kg resin + 0.28 kg hardener Surf Clear epoxy system is specially formulated for the manufacturing of wind-surf boards and surf boards. It is adapted for hand lay up of carbon, aramid, glass and HMP fabrics and is compatible with all core materials and foams. SR Surf Clear EVO resin characteristics: - Very tough epoxy resin with high thermo-mechanical performance. Recommended for high performance wave and slalom wind surf boards and sandwich (or not sandwich for wave riding surf) construction. - Creates ultra light composite parts with high mechanical resistance and UV stability. - For surface preparation / plug finishing, high-gloss requirements. - Other applications: Jewellery, coating of coloured patterns, prototypes.   Surf Clear EVO epoxy resin is manufactured with a bio-based carbon content of about 40%.   System characteristics: - Very good UV stability - Hardening without tack - High gloss - Low viscosity - Transparency of laminates - Self leveling - Scratch resistance   Instructions for application: Work in a clean environment with heating facility. Working temperature: 20 oC/ 68 oF minimum, 35-40 oC/ 95-104 oF maximum. Maintain a constant temperature during lamination. Avoid high ambient humidity (< 70%). Avoid exposure to UV during cure. Laminates and coatings have a polymerization cycle of 14 days at 25 oC/ 77 oF. Post curing offers greater UV resistance. Do not wet sand laminates or coatings before 4 days at 25 oC/ 77 oF. Do not dilute with acetone, ester or alcohol based solvents. Keep packaging well sealed as hardener is sensitive to carbonic gas and humidity. A polyurethane paint finish can be applied without primer after sanding the final layer of resin. Curing profile: Wait before post-curing: 24 hours. Minimum cure: 12 hours 40 oC/ 104 oF. Optimum cure: 8 hours 60 oC/ 140 oF. PROPERTIES Physical properties of SR Surf Clear EVO epoxy resin: Appearance / colour: Light purple liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 2925 ± 575 Density (g/cm3) at 20 oC/ 68 oF: 1,1817 Physical properties of SD EVO medium hardener: Appearance / colour: Light yellow liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 120 ± 25 Density (g/cm3) at 20 oC/ 68 oF: 0.992 Mix properties of SR Surf Clear EVO / SD EVO medium system: Mix viscosities (mPa.s) at 20 oC/ 68 oF: 1570 Mixing ratio by weight: 100 g / 39 g Mixing ratio by volume: 100 ml / 50 ml (2 / 1) Reactivity of SR Surf Clear EVO / SD EVO medium system: Pot life of 150 g mix at 20 oC/ 68 oF: 10' Exothermic peak time of 150 g mix at 20 oC/ 68 oF: 18' Exothermic temperature of 150 g mix at 20 oC/ 68 oF: 228 oC/ 442 oF   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr8500 kta311, epoxy resin for hot preimpregnation, epoxy resin for cold preimpregnation (Set of 2 components resin + hardener)   SR8500 / KTA311 epoxy system for cold (or hot) preimpregnation Each kilo includes 0.83 kg resin + 0.17 kg hardener SR8500 / KTA311 is a 2 component, slow reactivity, solvent and reactive diluent free matrix system, designed for manual, (hand,) in-house fabric preimpregnation. Before mixing, the 2 components have a storage life of at least 1 year. After mixing and impregnation, the resulting preimpregnated fabric develops the desired tack at room temperature, and may be placed in a freezer. The out (of the freezer) life of this prepreg is at least 1 month. Consequently, this system is a versatile, cost effective solution that helps small production facilities to reduce their stock, and avoid keeping large quantities of various kinds of prepregs in the freezer. Curing temperature range is from 80 to 150 oC(176 to 302 oF). Applications: Fabric preimpregnation by hand or machine, filament winding and adhesives. Particularly useful also for very large parts and hot press moulding. PROPERTIES Epoxy resin SR8500: Aspect / colour: Yellowish viscous liquid Density (kg/L) at 20 oC/ 68 oF: 1.176 ± 0.005 Viscosity (mPa.s) at 20 oC/ 68 oF: 9 800 ± 1000 Hardener KTA311: Aspect / colour: White viscous liquid Viscosity at 20 oC/ 68 oF: 9000 ± 2000 Density at 20 oC/ 68 oF: 1.13 Mix properties of SR8500 / KTA311: Mix viscosities (mPa.s) at 20 oC/ 68 oF: 5700 Weight ratio: 100 / 21 g Volume ratio: 100 / 22 ml Tack evolution: Let at 23 oC/ 73.4 oF for 48 hours or 16 hours at 40 oC/ 104 oF   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr8160 sd815b4, epoxy resin for impregnation, flexible epoxy resin (Set of 2 components resin + hardener)   Flexible epoxy system SR8160 / SD815B4 with slow hardener Each kilo includes 0.83 kg resin + 0.17 kg hardener SR8160 / SD815B4 is a system designed for laminating parts that exhibit shock and impact resistance, like the underbody of off road car racing. It may be used alone or as an additive to modify other epoxy systems. Also, it may be used to impregnate the outer layer(s) of laminates (so to take first contact of impacts,) and to achieve anisotropic behavior (in terms of thickness) of a part. In this case special care should be taken so to prevent delamination by making a gradual transition from elastic to rigid matrix. This gradual transition can be achieved by using 2 or 3 progressively lower content ratios (on subsequent fabric layers) of SR8160 system, so to go from pure elastic to more rigid epoxy gradually. A very high ambient temperature is needed for pure SR8160 flexible system to start the hardening reaction. Description: - 80 to 110 % of elongation at break in tension - Shock resistance over 150 KJ / m2 - Unfilled and translucent - Advantages compared to polyurethane: Does not foam when in contact with humidity Memory of shape Applications: - Parts under vibrations, shocks, low temperature - Flexible laminates: Body parts for cars, motorbike, 4X4 etc - Casting and inclusion (degassing under vacuum) - Part design / prototyping Minimum curing cycle: 24 hours at ambient temperature + 6 hours at 40 oC/ 104 oF + 10 hours at 60 oC/ 140 oF PROPERTIES Physical properties of SR8160 epoxy resin: Aspect / colour: Yellowish viscous liquid Viscosity at 20 oC/ 68 oF (mPa.s): 7800 Density at 20 oC/ 68 oF (kg / l): 1.144 Physical properties of SD815B4 hardener: Aspect / colour: Clear liquid Viscosity at 20 oC/ 68 oF (mPa.s): 24 Density at 20 oC/ 68 oF (kg / l): 0.98 Mix properties of SR8160 / SD815B4 system: Mix viscosities at 20 oC/ 68 oF (m.Pas +- 20 %): 2750 Weight ratio: 100 / 20 g Volume ratio: 100 / 24 ml Reactivity of SR8160 / SD815B4 system: Time taken to achieve exotherm at 30 oC/ 86 oF: 4h   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr1660 sd7820, epoxy resin for impregnation, high temperature epoxy resin, epoxy resin for laminating (Set of 2 components resin + hardener)   Heat resistant epoxy system SR1660 / SD7820 with slow hardener Each kilo includes 0.76 kg resin + 0.24 kg hardener Epoxy system developed for high service temperature tooling from 120 °C up to over 200 °C continuously depending on the chosen hardener. It exhibits excellent chemical resistance, resistance to oxidization and low exothermic peak. Suitable for laminating, press moulding, casting or injection.    Slow hardener SD7820: Epoxy system for parts or tooling with a service temperature up to 120 °C/ 248 oF, 160 °C/ 320 oF peak.   Applications: Composite tooling for "120°C" prepreg, thermoforming tooling or structural parts with a high service temperature. PROPERTIES Physical properties of SR1660 epoxy resin: Aspect / colour: Yellow liquid Viscosity (m.Pas) at 20 oC / 68 oF: 8500 ± 1500 Density at 20 oC / 68 oF: 1.15 ± 0.01 Physical properties of SD7820 hardener: Aspect / colour: Clear to yellow liquid Viscosity (m.Pas) at 20 oC / 68 oF: 80 ± 15 Density (g/cm3): 0.96 ± 0.01 Mix properties of SR1660 / SD7820 system: Weight ratio: 100 / 32 g Volume ratio: 100 / 39 ml Mix viscosity (m.Pas) at 20 oC / 68 oF: 2400 ± 500 Reactivity of SR1660 / SD7820 system: Exothermic peak on 500 g mix at 20 oC/ 68 oF: 180 oC/ 356 oF Time to reach exothermic peak at 20 oC / 68 oF: 6 h   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr1126 sd8203, epoxy resin for impregnation, auto extinguishing epoxy resin, epoxy resin for laminating (Set of 2 components resin + hardener)   Fire resistant epoxy laminating system SR1126 / SD8203 with medium hardener   Each kilo includes 0.83 kg resin + 0.17 kg hardener   Auto extinguishing laminating epoxy system. It creates low smokes and low toxicity smokes, exhibits good temperature resistance and is bromine free. With high temperature or fire, the system expands, producing solid char barrier that protects inner materials from heat and flames. This system allows to get UL94 V0 and FAR 25 laminate parts as well as AIRBUS and BOEING standards concerning fumes and fume toxicity (please see data sheet for all details concerning FAR 25 and UL94 V0 approvals).   Medium hardener SD8203: Suitable for manufacturing medium to large part by hand lay, press moulding and vacuum bagging. Post cure at 40 °C minimum before unmoulding. Designed for high performance composites, with service temperature up to 60 - 70 °C/ 140 - 158 oF.   PROPERTIES Physical properties of SR1126 epoxy resin: Aspect / colour: White viscous liquid Viscosity (mPa.s) at 20 oC/ 68 oF: 9 000 ± 2 000 Density at 20 oC / 68 oF: 1.28 ± 0.01   Physical properties of SD8203 hardener: Aspect / colour: Yellow liquid Viscosity (mPa.s) at 20 oC / 68 oF: 140 ± 30 Density (g/cm3) at 20 oC / 68 oF: 1.040 ± 0.005   Mix properties of SR1126 / SD8203 system: Weight ratio: 100 / 20 g Volume ratio: 100 / 26 ml Mix viscosity at 20 oC / 68 oF: 2100 ± 400   Reactivity of SR1126 / SD8203 system: Exothermic peak on 150 g mix at 20 oC/ 68 oF: 42oC/ 107.6 oF Time to reach exothermic peak on 150 g mix at 20 oC/ 68 oF: 3 h   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr1126 sd1305, epoxy resin for impregnation, auto extinguishing epoxy resin, epoxy resin for laminating (Set of 2 components resin + hardener)   Fire resistant epoxy laminating system SR1126 / SD1305 with ultra slow hardener   Each kilo includes 0.85 kg resin + 0.15 kg hardener   Auto extinguishing laminating epoxy system. It creates low smokes and low toxicity smokes. It exhibits good temperature resistance and is bromine free. With high temperature or fire, the system expands, producing solid char barrier that protects inner materials from heat and flames. This system allows to get UL94 V0 and FAR 25 laminate parts as well as AIRBUS and BOEING standards concerning fumes and fume toxicity (please see data sheet for all details concerning FAR 25 and UL94 V0 approvals).   Ultra slow hardener SD1305: Suitable for large parts, long pot life and hot process. Tg onset / DSC = 130 °C/ 266 oF. Post cure at 120 °C/ 248 oF minimum   PROPERTIES Physical properties of SR1126 epoxy resin Aspect / colour: White viscous liquid Viscosity (mPa.s) at 15 oC/ 59 oF: 15000 ± 3000 Density at 20 oC / 68 oF: 1.28 ± 0.01   Physical properties of SD1305 hardener Aspect / colour: Yellow to red liquid Viscosity (mPa.s) at 20 oC / 68 oF: 278 ± 50 Density (g/cm3) at 20 oC / 68 oF: 0.990 ± 0.005   Mix properties of SR1126 / SD1305 system Weight ratio: 100 / 18 g Volume ratio: 100 / 23 ml Mix viscosity at 20 oC / 68 oF: 4200 ± 800   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system sicomin sr1710 sd7820, epoxy resin for tooling, high temperature epoxy resin (Set of 2 components resin + hardener)   High temperature epoxy system SR1710 / SD7820 Each kilo includes 0.73 kg resin + 0.27 kg hardener High temperature epoxy system specially formulated for oven temperature or autoclave conditions curing. It is used for production of high performance and high temperature resistant parts with outstanding mechanical properties in sectors such as motorsport, aerospace, and many more. It is also used for manufacturing of temperature resistant molds. It has low viscosity allowing fast wetting of reinforcements, and exhibits excellent adhesion properties to all types of fibers. It is very handy for most demanding applications, with a very long working time (~ 8 hours at 20° C/ 68 oF). It can also be used to step up production to higher temperature resistance, as it can be demolded after a relatively low temperature postcuring. Heat treating to resist higher temperatures may very well come as a second step or at a later time. For this reason this system is very useful when we have to work with plugs or molds that do not resist high temperatures. The initial minimum curing before demolding is 12 hrs at 40° C/ 104 oF or 6 hrs at 60° C/ 140 oF. PROPERTIES Physical properties of SR1710 epoxy resin: Aspect / colour: Yellowish liquid Viscosity (m.Pas) at 20 oC / 68 oF: 1450 +- 150 Density at 20 oC / 68 oF: 1.15 (+-0.010) Physical properties of SD7820 hardener: Aspect / colour: Clear liquid Viscosity (m.Pas) at 20 oC / 68 oF: 60 +- 4 Density (g/cm3): 0.957 Mix properties of SR1710 / SD7820 system: Weight ratio: 100 / 36 g Volume ratio: 100 / 43 ml Mix viscosity (m.Pas) at 20 oC / 68 oF: 550 Reactivity of SR1710 / SD7820 system: Pot life on 500 g mix at 20 oC: 5 h 52' Exothermic peak on 500 g mix at 20 oC: 155  oC/ 311 oF Time to reach exothermic peak at 20 oC / 68 oF: 6 h 55'   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system r482 h17, epoxy resin for impregnation, low cost epoxy resin, epoxy resin for laminating (Set of 2 components resin + hardener)   Cost / performance epoxy system R482 / H17 Each kilo includes 0.85 kg resin + 0.15 kg hardener Suitable for marine and wood composites. It has an excellent adhesion to many types of material like old polyester, wood, epoxy, metal and other, and is crystallization free. Applications: Production wooden sructures and marine enviroment. Laminating, bonding and protection of wood. Suitable also for laminating with carbon, aramid, glass, and other reinforcements. Hand lay-up, vacuum bagging, compression and all open or closed mold fabricating in general. Positive features: Excellent cost / performance ratio, excellent impregnating, low air voids, excellent elongation at break. Very good chemical resistance in the cured state. Very useful system when laminating and repairing very large, outdoor structures where post curing is not possible. PROPERTIES Mix ratio by weight: 18 / 100 Pot life of 150 g at 25 oC/ 77 oF: 20 min. Peak exotherm of 150 g at 25 oC/ 77 oF: At 16 minutes 198 oC/ 388 oF Demoulding time at 25 oC/ 77 oF: 18 hours For safety - storage instructions please contact.   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

epoxy system r482 h50, epoxy resin for impregnation, low cost epoxy resin, epoxy resin for laminating (Set of 2 components resin + hardener)   Cost / performance epoxy system R482 / H50 Each kilo includes 0.67 kg resin + 0.33 kg hardener Applications: Production of glass, aramid, carbon, and all fiber reinforced products. Hand lay-up, vacuum bagging, infusion, winding, compression, RTM and all open or closed mould fabricating in general. Positive features: Excellent cost / performance ratio, excellent impregnating, low air voids. Very good chemical resistance in the cured state. Very good filler acceptance, very mild odor. PROPERTIES Mix ratio by weight: 50 / 100 Pot life of 150 g at 25 oC/ 77 oF: 55 min. Peak exotherm of 150 g at 25 oC/ 77 oF: At 50 minutes 140 oC/ 284 oF Demoulding time at 25 oC/ 77 oF: 50 hours For safety - storage instructions please contact.   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..

  (Set of 2 components resin + hardener)   General purpose structural epoxy system R300 / H336 Each kilo includes 0.71 kg resin + 0.29 kg hardener R300/H336 is a general purpose structural epoxy system specially formulated for a wide range of temperature application. Besides room temperature it can also be used to impregnate at both lower and higher temperature, for example from 10 oC/ 50 oF to 40 oC/ 104 oF. The cured components can be handled or used without postcure, but in order to achieve the outstanding mechanical properties a heat treatment at higher temperature is necessary. After room temperature curing, the components are not brittle, thus can be demolded or handled for further processing. Besides, R300/H336 system exhibits low shrinkage, that also makes heat treating out of the mold possible. This way it can be used with non heat resistant molds and prototypes. A higher temperature resistance is possible to be achieved later, with subsequent postcuring cycles. It also exhibits good adhesion properties, low surface pollution and a high gloss finish, even at unfavorable working conditions. Its low viscosity makes fast wetout of the reinforcement possible. After the first impregnation stage, the system develops thixotropy, making application on vertical surfaces much easier. PROPERTIES Physical properties of R300 epoxy resin: Viscosity (m.Pas) at 25 oC/ 77 oF: 600 - 900 Density (g/cm3) at 25 oC/ 77 oF: 1.18-1.23 Physical properties of H336 hardener: Viscosity (m.Pas) at 25 oC/ 77 oF: 50-100 Density (g/cm3) at 25 oC/ 77 oF: 0.94-0.97 Mix properties of R300 / H336 system: Weight ratio: 100 / 40 g Volume ratio: 100 / 50 ml Reactivity of R300 / H336 system: Pot life on 500 g mix at 20-25 oC/ 68-77 oF: 2-3 h For detailed data sheet please contact.   Intrastat Number for this product: Epoxy: 39073000, Hardener: 29213091..