Epoxy system SR1720 / SD7840

 

High temperature epoxy system SR1720 / SD7840

Each kilo includes 0.79 kg resin + 0.21 kg hardener

Epoxy system specially formulated for high temperature resistance. It exhibits low viscosity which makes it suitable for infusion and RTM applications. It also develops good mechanical properties after an initial posturing at low temperature, for example 50 °C, allowing parts to be demolded. This makes the system possible to be used with non heat resistant moulds and prototypes. Higher temperature resistance, up to 200 °C is possible to be achieved later, with subsequent postcuring cycles.

PROPERTIES
Physical properties of SR1720 epoxy resin:
Aspect / colour: Yellowish liquid
Viscosity (cps) at 20 ^oC / 68 ^oF: 8500(+-1500)
Density at 20 ^oC / 68 ^oF: 1.18(+-0.01)

Physical properties of SD7840 hardener:
Aspect / colour: Reddish yellow liquid
Viscosity (cps) at 20 ^oC: 22(+-4)
Density (g/cm3): 0.97(+-0.01)

Mix properties of SR1720 / SD7840 system:
Weight ratio: 100 / 26 g
Volume ratio: 100 / 32 ml
Mix viscosity (cps) at 30 ^oC / 86 ^oF: 450(+-100)

Reactivity of SR1720 / SD7840 system:
Pot life on 500 g mix at 40 ^oC: 42'
Exothermic peak on 500 g mix (^oC) at 40 ^oC: > 250 ^oC
Time to reach exothermic peak at 40 ^oC: 1h 8'