Your Cart

Nomex aramid honeycomb Thickness 20 mm Cell size 3.2 mm

Nomex aramid honeycomb Thickness 20 mm Cell size 3.2 mm Aramid/Nomex honeycomb
Nomex aramid honeycomb Thickness 20 mm Cell size 3.2 mm Aramid/Nomex honeycomb
Nomex aramid honeycomb Thickness 20 mm Cell size 3.2 mm Aramid/Nomex honeycomb
Nomex aramid honeycomb Thickness 20 mm Cell size 3.2 mm Aramid/Nomex honeycomb
Nomex aramid honeycomb Thickness 20 mm Cell size 3.2 mm Aramid/Nomex honeycomb
Nomex aramid honeycomb Thickness 20 mm Cell size 3.2 mm Aramid/Nomex honeycomb
Nomex aramid honeycomb Thickness 20 mm Cell size 3.2 mm Aramid/Nomex honeycomb
Nomex aramid honeycomb Thickness 20 mm Cell size 3.2 mm Aramid/Nomex honeycomb
Nomex aramid honeycomb Thickness 20 mm Cell size 3.2 mm
497.28€ / sheet

Available Options

 
Aramid honeycomb, Nomex or equivalent
497.28 EUR / panel
 
Panel minimum size: 1.25 X 2.50 m
Total surface of 1 panel: 3.125 sqm
Thickness: 20 mm
Density: 48 kg / m3
Cell size: 3.2 mm (hexagonal)

MECHANICAL PROPERTIES
Compression:
Strength: 150 PSI
Modulus: 11 KSI

Plate shear:
Strength (PSI "L" direc): 100
Strength (PSI "W" direc): 55
Modulus (KSI "L" direc): 4.3
Modulus (KSI "W" direc): 2.1

Ultra lightweight, aramid honeycomb used in sandwich constructions. Unlike metals, Nomex provides galvanic corrosion resistance (also against corrosion of metal inserts) and allows the use of carbon skins. Other definite advantages are low thermal expansion and conductivity and high heat and fire resistance. Its superior mechanical properties and high dimensional stability under heat and moisture make it suitable for a large variety of high-end applications.

In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thinner than 5 mm) or cut them, so they fit in our 37 X 38 X 114 cm carton box. If you like your panel(s) rolled or cut in other dimensions, please specify.

DISCLAIMER
All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request.

 

Intrastat Number for this product: 4823908580

Product MDS