PVC foam perforated with grooves 80/15PG

40.35 EUR / panel
Spec. weight: 80 kg / m³
Thickness: 15 mm
Panel size: 1090 X 1020 mm
Total surface of 1 panel: 1.11 m²
Grooves: 20 mm X 20 mm, on one size, both directions ("one side")
Grooves width: 2 mm
Holes diameter: 2 mm

CELLFOAM

Is a lightweight, closed-cell PVC foam designed for universal use in sandwich structures. This version is perforated (with holes) and grooved (with carved channels). The perforation and grooves are specifically designed and optimized to facilitate fast resin flow in the infusion/injection process. The perforation allows the resin to pass easily through the foam to the underside, while the grooves distribute the resin flow effectively.
 
Ideally suited for both static and dynamic loading, it is compatible with all resin systems. Its excellent stiffness, high strength-to-weight ratio and toughness make it suitable for a wide range of sandwich applications. It can be easily cut with a knife (similar to plasterboards), shaped easily, for example with wood shaping tools, smoothed with sandpaper, and can be thermoformed into curves.

 

High strength and stiffness to weight ratio
Ease of adhesion
Compatible with most types of resin systems
Rot resistant
Good thermal insulation
Self extinguishing, good fire behaviour
Very low water absorption

In order for very few individual panel(s) to be shipped, we usually roll them up (if they are thin, usually below 5 mm) or cut them, so they fit in our 37 X 38 X 114 cm carton box. If you like to have your panel(s) rolled or cut in other dimensions, please specify.