Epoxy system Mixfill 80

 

Epoxy trowelable system Mixfill 80 for fairing

Each kilo includes 0.57 kg resin + 0.43 kg hardener

Mixfill 80 is a filled coating formulated based on flexibilized epoxy systems and with high mechanical performance at high percentages of elongation to break (8-15%) and a good impact resistance. Coating is filled under vacuum with a complex of very low density fillers (~ 0.6) and low abrasive power in order to ensure greater sustainability of sanding and machining without scrub tools.

 

Epoxy system Mixfill 80:
- Excellent quality of application without microbubbles
- Ease of application to the rule or the spatula
- Excellent sandability with flat sanding or sander
- Very low clogging of the abrasive
- Great fineness of the film
- No drying shrinkage during drying
- Low exotherm in thick
- Excellent impact resistance
- Ease of dosing by volume (1/1)

PROPERTIES
Physical properties of Mixfill 80 base:
Aspect / colour: Grey paste
Viscosity (m.Pas) at 20 ^oC / 68 ^oF: 71900 ± 14400
Density at 20 ^oC / 68 ^oF: 0.6500

Physical properties of Mixfill 80 hardener:
Aspect / colour: White paste
Viscosity (m.Pas) at 20 ^oC / 68 ^oF: 106000 ± 21200
Density (g/cm3): 0.4800

Mix properties of Mixfill 80 system:
Weight ratio: 100 / 75 g
Volume ratio: 100 / 100 ml
Mix viscosity (m.Pas) at 20 ^oC / 68 ^oF: 106000 ± 21200

Reactivity of Mixfill 80 system:
Exothermic temperature on 500 g mix (^oC) at 20 ^oC: 111 ^oC
Time to reach exothermic peak on 500 g mix at 20 ^oC: 52'

Pot life of 500 g mix at 20 ^oC: 34'