C212T2pp Carbon prepreg "Out of autoclave"

 

Carbon prepreg C212T2pp, optimized for out of autoclave (vacuum only) curing. One side of the fabric is partially impregnated with a resin film, and the other side is dry (to facilitate the air and volatile content to escape). C212T2pp is a not high tack prepreg. Tack enhancing may be achieved by means of temperature or special purpose tack modification spray.

 

Fabric weight: 206 g / sq.m.
Width: 1.27 meters
Weaving style: Twill 2X2
Prepreg weight: 332 g / sq.m.
Epoxy content: 38 %
Volatile content: < 1 %
Gel time at 125 C: 7-8 min
Warp: 3K TR30S carbon fiber, 49.5%, 5.10 ends (threads) / cm
Weft: 3K TR30S carbon fiber, 50.5%, 5.20 ends / cm

 

12 h at 80 C (Tg 110-115 C) or
1 h at 135 C (Tg 120-125 C)

 

 

12 months at - 18 ^oC
5-6 weeks at room temperature
Allow prepreg roll to reach room temperature before opening plastic bag to prevent condensation.

 

Please click on picture, for a closer view to the fabric's real size. To realize actual size with precision please observe the threads / cm feature mentioned above.

 

DISCLAIMER

All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. Fibremax Ltd reserves the right to make modifications on fabrics, change yarns, specifications, and all information given herein, without notice. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request with roll serial number.