Adhesive film F180Vpp, suitable for vacuum bag, press or autoclave process, based on preimpregnated ultralight supporting veil (to ease handling)
TECHNICAL CHARACTERISTICS
Supporting veil nominal weight: 14 g/sq.m. (8%)
Resin weight: 166 g/sq.m. (92%)
Total prepreg weight: 180 g/sq.m.
Volatile content: < 1.5 %
Gel time at 125 C: 7 min
RECOMMENDED CURING CYCLES
16 h at 80 C (Tg 90 C) - postcuring at 125 C recommended
9 h at 90 C (Tg 100 C) - postcuring at 125 C recommended
5 h at 100 C (Tg 110 C) - postcuring at 125 C recommended
1 h at 120 C (Tg 120 C)
Postcuring at 130 C (with a step of 1 C/min) could be performed in order to maximize properties
STORAGE LIFE
12 months at - 18 oC
5 weeks at 20 C
Allow prepreg roll to reach room temperature before opening plastic bag to prevent condensation.
Please click on picture, for a closer view to the fabric's real size. To realize actual size with precision please observe the threads / cm feature mentioned above.
DISCLAIMER
All information herein is given for guidance and general information purposes only, represents typical properties, and should not be used for specification limits purposes or basis for design. Fibermax Composites reserves the right to make modifications on fabrics, change yarns, specifications, and all information given herein, without notice. It is only on written certificates and agreements that we provide our customers with warrants for the quality and/or advise for the suitability of products for particular uses. Data sheets and certificates of conformity are promptly provided upon request with roll serial number.
Intrastat Number for this product: 68151200
