Release Wax W102 Regular

 

Mold release wax, container of 400 g

DIRECTIONS
Apply using a circular, overlapping motion, an even moist film. Allow TR-102 Regular and TR-104 Hi Temp to dry to uniform haze, usually within 5-10 minutes. Hand wipe with a clean dry cloth. For new tooling, it is highly recommended to use the TR-301 Sealer Glaze to improve gloss and seal mold surface. Five to six coats of the paste wax release are normally required for best results. After polish wipe, allow a minimum of 30 minutes between coats for the wax to dry.

Conversion data: 400 g = 14 oz